SE Sport 300 Hydrofoil, White, 40 to 350HP Engine Capacity from SPORT MARINE TECHNOL
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.
$59.99
|
SE Sport 300 Hydrofoil, Gray, 40 to 350HP Engine Capacity from SPORT MARINE TECHNOL
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.
$59.99
|
SE Sport 200 Hydrofoil, Black, 8 to 40HP Engine Capacity from SPORT MARINE TECHNOL
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.
$49.99
|
Sport Clip for SE Sport Hydrofoils from SPORT MARINE TECHNOL
New Sport Clip makes SE Sport hydrofoils the easiest to install, because you do not need to drill holes in the cavitation plate. All required hardware is included.
$39.99
|
Men's Trader Shorts, Black, 40 from WEEKENDER®
Easy care fabric! These 65% polyester/35% cotton twill shorts have a back elastic waistband for a truly comfortable fit. Feature deep front cargo pockets and a secured back pocket. Men's Sizes: 32 – 42. Colors: Sand, Navy, Black, Chambray. 6" inseam.
$19.99
|
Power Lift Transom Jack without Gauge from COOK MFG
These outboard lifting devices work independently of power trim and tilt to allow the boat-engine-prop combination to work at maximum efficiency, to adjust your engine down, when underway at full speed for better out-of-hole shots, or up, for more top end speed and better prop clearance in shallow water. Superior construction makes these transom jacks a top choice. Made of 1/2" 6061 T6 aluminum throughout, without welds or castings. The 2"dia. Designed for V-6 and smaller outboards.
$699.00
|
One-Piece Manual Power Lift from COOK MFG
Same high quality components, capacity and specifications as the hydraulic Power Lift Transom Jacks, above, but adjust manually. Rather than by an hydraulic pump, height is adjusted by turning a 1 -/8" nut on the bottom or the top of the jack with a socket wrench. Then tighten the four side bolts with the same wrench to 100 FPT pounds each. Dimensions: 18-1/8"W x 15-1/2"H - 5-1/2" setback - 5" travel. Material: 6061 T6 aluminum with stainless hardware.
$249.99
|
Muffler, 4" In/Out OD, 9.06" Body dia., 26.69" Body Length, 33.69" Overall from CENTEK INDUSTRIES
Carefully engineered to minimize back pressure while providing excellent exhaust noise reduction. The all-fiberglass muffler will not corrode or deteriorate when exposed to fresh or salt water in combination with either diesel or gasoline exhaust fumes. UL-listed. Material: Fiberglass. Application: Engines above water line.
$214.99
|
Muffler, 3" In/Out OD, 7.07" Body dia., 18.84" Body Length, 25.84" Overall from CENTEK INDUSTRIES
Carefully engineered to minimize back pressure while providing excellent exhaust noise reduction. The all-fiberglass muffler will not corrode or deteriorate when exposed to fresh or salt water in combination with either diesel or gasoline exhaust fumes. UL-listed. Material: Fiberglass. Application: Engines above water line.
$139.99
|
Muffler, 5" In/Out OD, 11.00" Body dia., 30.00" Body Length, 38.75" Overall from CENTEK INDUSTRIES
Carefully engineered to minimize back pressure while providing excellent exhaust noise reduction. The all-fiberglass muffler will not corrode or deteriorate when exposed to fresh or salt water in combination with either diesel or gasoline exhaust fumes. UL-listed. Material: Fiberglass. Application: Engines above water line.
$389.99
|
Muffler, 3.5" In/Out OD, 8.09" Body dia., 23.00" Body Length, 30.00" Overall from CENTEK INDUSTRIES
Carefully engineered to minimize back pressure while providing excellent exhaust noise reduction. The all-fiberglass muffler will not corrode or deteriorate when exposed to fresh or salt water in combination with either diesel or gasoline exhaust fumes. UL-listed. Material: Fiberglass. Application: Engines above water line.
$244.99
|
