Continuous Duty, SPST-Insulated Solenoid

Continuous Duty Solenoid, 12 Volt from COLE HERSEE
Rated at 750A make/100A break, and rated for continuous duty. Can be used with Lectra-San MSDs and other high-amperage circuits where remote operation is desired. Insulated ground.
$43.99

Continuous Duty Solenoid from COLE HERSEE
Rated at 750A make/100A break/85A continuous, this solenoid is for intermittent use: 10 seconds On, 30 minutes Off. Insulated ground . Plasticized steel housing, brass hardware . Bracket mounting holes 5/16" x 19/32", 2-13/64" on centers.
$52.99

12V Continuous Duty Solenoid from WEST MARINE
For safe, dependable control of a windlass or other high-amperage DC equipment. Continuous duty. Rated at 750A make, 100A break, 80A continuous. Insulated ground.
$35.99

Continuous Duty Solenoid from RARITAN
Continuous Duty Solenoid Use with push-button switch to take high current load off switch. Reduces need for long runs of heavy wire.
$34.99

Ultra-Reliable Electronic Solenoid from COLE HERSEE
85A solid-state solenoid designed for long life (rated to 1 million on-off cycles). For 12V and 24V systems, serving either continuous or intermittent duty. Designed for high-side or low-side switching applications and for high inrush demand circuits.
$112.99

Motor Reversing Solenoid from COLE HERSEE
Two solenoids in one saves money and simplifies wiring. Rated at 75A make and break at 12V. DPDT intermittent duty.
$99.99

12V Solenoid from COLE HERSEE
Rated at 750A make/100A break, this solenoid is for intermittent use: 10 seconds On, 30 minutes Off. Insulated ground.
$52.99

M-527 2 Circuit SPST Push-Pull Switch from COLE HERSEE
Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type. Stems: 3/8"dia. x 1-1/4"L. 6–36V DC. Rated for 10A at 12V DC. M-527 2 Circuit SPST Switch Heavy-duty 10A OFF/ON switch controls two circuits. Brass case, 3/8" mounting shaft.
$19.99

Solenoid 18-5817D, Curved Bracket replaces Mercury P/N 89-96158T from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
$19.99

P-Line Solenoid 18-5816 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
$19.99

P-Line Solenoid 18-5815 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
$22.99