Heavy-Duty Helm Assemblies

HD Helm Assembly, 1" Straight Shaft from HYNAUTICS
These helms combine one or two bi-directional axial piston pumps with pilot check and make-up check valving. The result is a unit that prevents rudder feedback, is very efficient (even at low rpm) and is immediately adaptable to multi-station use.
$759 $759.00

Series 135 Heavy-Duty Water Hose, 3/4"ID, 1-1/8"OD from SHIELDS RUBBER
Use for engine water, sinks, icebox, drain lines, bilge pumps and air conditioners. Sold per foot; 50' maximum continuous length. Application: Engine heater hose, heat exchanger, A/C circulation; sink, icebox shower and livewell drain lines, head intake. Material: EDPM rubber. Reinforcement: Polyester fabric spiral. Temperature Range: –40° to 190°F. Working Pressure: 200psi.
$3.19

Heavy-Duty 4-Cycle Engine Oil, SAE 15W-40, Gallon from PENNZOIL
Heavy-duty, 4-stroke marine oil protects engine, even under severe conditions Provides outstanding protection for diesel and four-cycle inboard/outboard gasoline engines in marine environments. High viscosity and film strength provide protection in high speed/high load applications. Helps reduce corrosive wear. Meets or exceeds major manufacturers' warranty requirements and API service CI-4/SL (15W-40 only), CF-4, CF-2, CF/SJ. Exceeds Original Equipment Manufacturer’s warranty.
$16.99 $16.99

Heavy-Duty 4-Cycle Engine Oil, SAE 30, Gallon from PENNZOIL
Heavy-duty, 4-stroke marine oil protects engine, even under severe conditions Provides outstanding protection for diesel and four-cycle inboard/outboard gasoline engines in marine environments. High viscosity and film strength provide protection in high speed/high load applications. Helps reduce corrosive wear. Meets or exceeds major manufacturers' warranty requirements and API service CI-4/SL (15W-40 only), CF-4, CF-2, CF/SJ. Exceeds Original Equipment Manufacturer’s warranty.
$16.99 $16.99

Heavy-Duty 4-Cycle Engine Oil, SAE 40, Gallon from PENNZOIL
Heavy-duty, 4-stroke marine oil protects engine, even under severe conditions Provides outstanding protection for diesel and four-cycle inboard/outboard gasoline engines in marine environments. High viscosity and film strength provide protection in high speed/high load applications. Helps reduce corrosive wear. Meets or exceeds major manufacturers' warranty requirements and API service CI-4/SL (15W-40 only), CF-4, CF-2, CF/SJ. Exceeds Original Equipment Manufacturer’s warranty.
$16.99 $16.99

3' Heavy-Duty Tiedown Strap from NRS
NRS Heavy-Duty Tiedown Straps can be used for virtually every hold-down application imaginable. Whether you're attaching your boat to your vehicle or your frame to your boat, NRS Straps won't let you down. You can never have too many straps, and these come in nine different lengths with a handy name tag for your convenience.
$3.89

4' Heavy-Duty Tiedown Strap from NRS
NRS Heavy-Duty Tiedown Straps can be used for virtually every hold-down application imaginable. Whether you're attaching your boat to your vehicle or your frame to your boat, NRS Straps won't let you down. You can never have too many straps, and these come in nine different lengths with a handy name tag for your convenience.
$4.19

Heavy Duty Ring Pull - Chrome from WEST MARINE
Designed for heavy hatches where a large, strong ring pull is required. Polished cast brass or chrome. 2 3/4" x 2 1/4". Ring ID: 1 1/8". Requires #8 FH screws (sold separately).
$32.99

Heavy Duty Holding Tank, 18 Gal. from TODD ENTERPRISES
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
$234.99

Heavy Duty Holding Tank, 24 Gal. from TODD ENTERPRISES
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
$179.99

Heavy Duty Holding Tank, 13 Gal. from TODD ENTERPRISES
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
$144.99