3-1/2" Dock Guard 6' Coil

Skene Chock - Chromed Zinc 3 1/2" from PERKO
Chromed zinc line chock has a diagonal opening. 3 1/2" long. 1/2" Line size. Requires #8 fasteners .
$17.99

Closed-Base Cleats - Chromed Zinc 4 1/2", Plastic Base from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$24.99

Open-Based Cleats - Chromed Zinc, Plastic Base 4 1/2" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$22.99

Diver's Dream Anode 1/2" x 6 x 12, w/1/2" Slot from SEA SHIELD
ZHC Diver's Dream Anode. All zinc anodes conform to Mil-a-18001 1/2" thick. 6" wide. 12" length. 8. 5 lb. s.
$64.99

“D” Profile 12' Large Dock Guard, 12'L x 1-1/2"W x 3-1/2"H from TAYLOR
Protect your boat and dock with this new line of EPDM rubber dock edging. EPDM rubber is designed to withstand the most extreme environments and is soft enough to cushion your boat from the dock or pier. It’s softer than vinyl and stays flexible when exposed to UV, offering uncompromising longevity. Choose from five different profiles for protection where you need it most. Attachment Method: Stainless steel dock nails (sold separately). Shock Absorption Mechanism: EPDM Rubber.
$164.99 $164.99

3/4" Outlet 1, 1-1/8" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

5/8" Outlet 1, 3/4" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

Open-Based Cleats - Chromed Zinc, Plastic Base 6" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$19.99

3-1/2"W x 6'L Dock Guard from WEST MARINE
Thick, pliable, EPDM abrasion-resistant rubber strips mount on docks and pilings to absorb shock and protect hulls from damage. Won’t discolor or mar boat finish. Mount with stainless steel nails. 6'L. Material: Premium rubber . Attachment Method: Stainless steel dock nails (sold separately) . Cross Section Shape: D-shape . Shock Absorption Mechanism: EPDM Rubber .
$59.99 $69.99

1" Outlet 1, 1" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

Dry-Seal Shaft Seal, 3-1/2", Stern tube: 6" from LASDROP SHAFT SEALS
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
$760.00