Replacement Filters from CENTEK INDUSTRIES
This system can be easily installed to your watermaker inlet line to prevent gas and oil pollution. Even the slightest amount of oil or gas can irreparably damage a watermakers reverse osmosis membranes causing them to cease function. Using infused filters, this system captures all hydrocarbon pollution before it can enter the reverse osmosis matrix. A clean filter can remove 100% of oil, gas, diesel and other hydrocarbons from your water intake.
$68.49
|
BilgeKleen Revolutionary Filters - Medium from CENTEK INDUSTRIES
Each system includes a patented Mycelx filter, a filter housing and a Smartpad. The BilgeKleen system is available in three packages with different filter sizes and features: BK-1 includes a mounting bracket and fittings to accommodate 1/2", 3/4", and 1" hose and one filter; BK-2 includes a mounting bracket and one filter; and BK-3 includes a mounting bracket, wrench and one filter. Patented Mycelex filter absorbs petrochemicals.
$229.99
|
BilgeKleen Revolutionary Filters - Large from CENTEK INDUSTRIES
Each system includes a patented Mycelx filter, a filter housing and a Smartpad. The BilgeKleen system is available in three packages with different filter sizes and features: BK-1 includes a mounting bracket and fittings to accommodate 1/2", 3/4", and 1" hose and one filter; BK-2 includes a mounting bracket and one filter; and BK-3 includes a mounting bracket, wrench and one filter. Patented Mycelex filter absorbs petrochemicals.
$399.99
|
BilgeKleen Revolutionary Filters - Small from CENTEK INDUSTRIES
Each system includes a patented Mycelx filter, a filter housing and a Smartpad. The BilgeKleen system is available in three packages with different filter sizes and features: BK-1 includes a mounting bracket and fittings to accommodate 1/2", 3/4", and 1" hose and one filter; BK-2 includes a mounting bracket and one filter; and BK-3 includes a mounting bracket, wrench and one filter. Patented Mycelex filter absorbs petrochemicals.
$107.99
|
Pettit Protect Barrier Coat 4700/4701 from PETTIT
Prevent gelcoat blisters before they occur with this easy-to-use product Designed for both the prevention of gel coat blistering and the repair of existing blisters. The Pettit Protect system combines a high film build of epoxy–to minimize water absorption–with excellent resistance to chemicals, water, corrosion and abrasion. Good for all substrates including fiberglass, aluminum, steel and other metals. One gallon kit. Total Thickness Required: 12mil dry; 4mil dry per coat. Coverage: 112sq.
$87.99
|
Gen-Sep Water Separator, 2" Diameter, Gas In/Out 2.0", Water Outlet 1.5" from CENTEK INDUSTRIES
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.
$234.99
|
Gen-Sep Water Separator, 1-1/2" Diameter, Gas In/Out 1.5", Water Outlet 1.25" from CENTEK INDUSTRIES
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.
$214.99
|
Vernatube Exhaust Tubing, 10'-Length, 3.5"OD from CENTEK INDUSTRIES
Fire-retardant, filament-wound tubing for long or short exhaust runs. Plenty of strength for clamping and a semi-smooth surface for easy hose connections and tight seals. Sold in lengths of 10'. Shipping in one piece will incur additional shipping charges; it can be cut in half for shipment via U. P.
$154.99
|
45° Exhaust Elbow - 1.5" OD from CENTEK INDUSTRIES
Designed to work well with Marine Muffler components, these elbows provide superb exhaust gas flow and smooth clamping surfaces. Made of the same high quality material as Vernatube exhaust tubing.
$29.99
|
45° Exhaust Elbow - 6" OD from CENTEK INDUSTRIES
Designed to work well with Marine Muffler components, these elbows provide superb exhaust gas flow and smooth clamping surfaces. Made of the same high quality material as Vernatube exhaust tubing.
$99.99
|
BK-2 Replacement BilgeKleen Filter from CENTEK INDUSTRIES
We recommend that filters be checked or changed every 3 months.
$87.49
|
