Clear-Step Furling Blocks

Furling Block, 1-1/4" Stanchion Size, Aluminum Sheave, 5/8" Max. Line Dia., 850 SWL from SCHAEFER
This block leads the furling line outside your stanchions to keep furling lines out of the way. Slips over stanchions and secures by a simple set screw.
$77.99 $77.99

Closed-Base Cleats - Chromed Zinc 4 1/2", Plastic Base from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$24.99

Open-Based Cleats - Chromed Zinc, Plastic Base 4 1/2" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$22.99

1" Outlet 1, 1" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

3/4" Outlet 1, 1-1/8" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

5/8" Outlet 1, 3/4" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

Open-Based Cleats - Chromed Zinc, Plastic Base 6" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$19.99

7/16" Sheave Dia., 2-11/32"x 2" Base, 650lb. MWL, 4.7oz. from SCHAEFER
Designed for bringing control lines over the forward edge of cabin houses, coamings or rails. Ball bearing sheaves provide low friction support for lines that need to be bridged or lifted for a clean lead. Open race ball bearings allow salt, dirt and debris to be easily flushed out. Single blocks. Maximum line dia: 1/2". Use #10 fasteners. Configuration: Over-the-top lead block. Ball Bearings: Delrin® . Sheave: 7/16" . Line Dia: 7/16" .
$43.9 $43.90

Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
$11.69

2" Over-the-Top Fairlead Block, 2-7/8"x 2-1/16", 1,000lb. SWL from RONSTAN
Schaefer's Over the Top Blocks are designed for bringing control lines over the forward edge of cabin houses, coamings or rails. Ball Bearing sheaves provide low friction support for lines that need to be bridged or lifted for a clean lead. Max. line diameter: 1/2". Single ball bearing sheave. Sheave diameter, 300-40: 1-7/16" (37mm). Sheave diameter, 506-40: 2" (50mm). SWL (300-40): 650lb. SWL (506-40): 1000lb.
$61.2 $61.20

Delrin Sheave, 1/2" Max. Line Dia., 2" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
$11.69