333 Brushing Liquid - Quart from INTERLUX
Prevents paint from "flashing off" prematurely in hot weatherSlow-drying solvent eases brushing and improves flow with certain paint products. Extends drying time in hot weather.
$20.99
|
Mahogany Paste Wood Filller/Stain from INTERLUX
Fills the grain and stains the wood to enhance its natural beauty. Thinner required to change paste to paint-like consistency. Thinner: Interlux 333 Brushing Liquid.
$29.99
|
Brushing Liquid - Qt from INTERLUX
A slow drying solvent to ease brushing and facilitate the flow of specified paint coatings. It is recommended in various topside systems for removing sanding residue from fiberglass and wood surfaces.
$19.99
|
Ultra-Kote - Red, Gallon from INTERLUX
Designed for maximum performance, ULTRA-KOTE contains the highest copper loading in the Interlux lineHigh copper loading makes this paint ideal for severe fouling areas such as warm or tropical waters. This fast-overcoat, fast-launch formula exibits excellent color stability. May be used on fiberglass, wood or primed steel. May be applied over antifouling paint in good condition. Type: Modified Epoxy. Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood, steel hulls.
$239.99
|
Bilgekote - Gray, Gallon from INTERLUX
Helps to protect gelcoat and fiberglass in bilgeBilgekote is a fast-drying, durable coating formulated for application to bilge areas. Bilgekote helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Formulation: One-part enamel for bilge areas . Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: One/Two. Coverage: Brush: 75 sq. ft/qt, 300 sq. ft/gal; Spray: 60 sq. ft/gal. Thinner: Brush: 333 - Model 117598; Spray: 216 - Model 117945.
$112.99
|
InterProtect 2000E/2001E, Gray, Gallon from INTERLUX
Universal above- and below-the-waterline epoxy primerA high build universal above and below waterline epoxy primer for all surfaces. Fills severe cracks and crazing in gelcoat. Adheres well to properly sanded bare metal. Offered in gray, or white, which is excellent as a topside primer. Total Thickness Required: Above waterline: 2 coats; below waterline: 4-5 coats (10 mil minimum) . Drying Time: Overcoating: 3 hrs. to 2 wks @ 60°-80°F. . Coverage: Brush: 60sq. ft/qt. , 240sq.
$99.99 $99.99
|
InterProtect 2000E/2001E, White, Gallon from INTERLUX
Universal above- and below-the-waterline epoxy primerA high build universal above and below waterline epoxy primer for all surfaces. Fills severe cracks and crazing in gelcoat. Adheres well to properly sanded bare metal. Offered in gray, or white, which is excellent as a topside primer. Total Thickness Required: Above waterline: 2 coats; below waterline: 4-5 coats (10 mil minimum) . Drying Time: Overcoating: 3 hrs. to 2 wks @ 60°-80°F. . Coverage: Brush: 60sq. ft/qt. , 240sq.
$99.99 $99.99
|
Brightside Pre-Kote, White, Gallon from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
$99.99
|
Epiglass Epoxy Resin, Pump (for Gallon) from INTERLUX
A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60°F. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) . Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. @ 50°F; 14min.
$37.99
|
Interthane Thinner 2316 Reducing Solvent - Gallon from INTERLUX
Specific solvents for altering the brushing, rolling or spraying characteristics of specific paints2316 Reducing Solvent is a fast-evaporating solvent that improves sprayability of Perfection and certain epoxy paints. 2333N Reducing Solvent is a slow-evaporating solvent that facilitates brushing application of two-part polyurethanes and certain epoxy paints. To ensure optimum results, carefully read the instructions for the paint you plan to use and select your solvent accordingly.
$59.99
|
Brightside Polyurethane, Blue Glo White, Gallon from INTERLUX
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
$109.99
|
