Teak Lumber

Open-Based Cleats - Chromed Zinc, Plastic Base 4 1/2" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$22.99

5/8" Outlet 1, 3/4" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$23.99

13-1/2" x 22" Lightspeed 3-Blade Propeller from MERCURY MARINE
**Prop-LGHTSPD 13 1/2 R 22 3BL|**Prop-LGHTSPD 13 1/2 R 22 3BL.
$539.99

13-1/2" x 24" Lightspeed 3-Blade Propeller from MERCURY MARINE
**Prop-LGHTSPD 13 1/2 R 24 3BL|**Prop-LGHTSPD 13 1/2 R 24 3BL.
$399.99

13-1/2" x 22" Lightspeed 3-Blade Propeller from MERCURY MARINE
**Prop-LGHTSPD 13 1/2 R 22 3BL|**Prop-LGHTSPD 13 1/2 R 22 3BL.
$399.99

13-1/2" x 26" Lightspeed 3-Blade Propeller from MERCURY MARINE
**Prop-LGHTSPD 13 1/2 R 26 3BL|**Prop-LGHTSPD 13 1/2 R 26 3BL.
$399.99

13-1/2" x 24" Lightspeed 3-Blade Propeller from MERCURY MARINE
**Prop-LGHTSPD 13 1/2 R 24 3BL|**Prop-LGHTSPD 13 1/2 R 24 3BL.
$399.99

Original Bellows Shaft Seal, 1-1/2", Stern Tube: 2" to 2-3/4" from LASDROP SHAFT SEALS
The Original "Bellows" face seal features a vibration-absorbing bellows ideal for use on sailboats, powerboats or workboats. Our AMORFLEX bellows are second to none. This product is constructed of silicon rubber and hand wrapped in three layers of fiberglass on the inside. Like all Lasdrop models, a cutlass bearing is incorporated in to the product to ensure correct alignment with the shaft. The Original Bellows seal will fit stern tubes from 1-1/2" to 10-1/2" in diameter.
$335.00

Deck Fill, Waste, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
$39.99

Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
$29.99

Original Bellows Shaft Seal, 1-1/8", Stern Tube: 1-5/8" to 2-1/8" from LASDROP SHAFT SEALS
The Original "Bellows" face seal features a vibration-absorbing bellows ideal for use on sailboats, powerboats or workboats. Our AMORFLEX bellows are second to none. This product is constructed of silicon rubber and hand wrapped in three layers of fiberglass on the inside. Like all Lasdrop models, a cutlass bearing is incorporated in to the product to ensure correct alignment with the shaft. The Original Bellows seal will fit stern tubes from 1-1/2" to 10-1/2" in diameter.
$239.99

Original Bellows Shaft Seal, 7/8", Stern Tube: 1-1/2" to 2-1/8" from LASDROP SHAFT SEALS
The Original "Bellows" face seal features a vibration-absorbing bellows ideal for use on sailboats, powerboats or workboats. Our AMORFLEX bellows are second to none. This product is constructed of silicon rubber and hand wrapped in three layers of fiberglass on the inside. Like all Lasdrop models, a cutlass bearing is incorporated in to the product to ensure correct alignment with the shaft. The Original Bellows seal will fit stern tubes from 1-1/2" to 10-1/2" in diameter.
$225.00