Offshore Cam-Matic Cleat, 1-1/4"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Light springs allow the cleats to open freely, so the teeth do not have to be sharp and your line lasts longer. Use models with aluminum jaws for high loads or when the line will be drawn through the teeth for adjustment. Models #423 and #365 have carbon fiber jaws for lightweight durability. Cam #150 and #365 require two #10 FHMS. Cam #280 requires two 1/4" FHMS. Each ShWt 0.
$45.86 $45.86
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
$14.99
|
Cam Wedge Kit from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
$4.35
|
Wedge Kit (Large) from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
$5.49
|
Wedge Kit (Medium) from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
$4.20
|
Wedge Kit (Small) from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
$3.78
|
C-Cleat Ball-Bearing Base from RONSTAN
Twin bearing races provide movement through either 260 degrees or 360 degrees. Ratchet-controlled rotation by adjustable-pressure screw. Kit includes C-Cleat, Fast Track fairlead, wedge kit and spring. Unique three-position arm Fits 1/4"-1/2" line and blocks from 1-1/2"-3" Working load: 660lb. Weighs 11. 25oz.
$90.81
|
SeaStar 20° Dash Wedge Kit from TELEFLEX
Allows a SeaStar helm to be mounted 20° from perpendicular in any of four configurations (not for BayStar).
$57.99 $57.99
|
Micro Carbo-Cam Cleat Kit with 471 Cam, 475 Fairlead from HARKEN
Micro Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Mounted aft of the cam, fairleads allow you to engage and release a line up to 45° on either side of the cam. Mounted ahead of the cam, fairleads allow moving lines, such as small catamaran traveler controls, to lead properly. Cam kits include: Cam-Matic® cam cleat: Pawls open/close easily on ball bearings . Large diameter low-friction guides with stainless steel tubes protect lines .
$15.16 $15.16
|
Wedge Kit for Micro Cam (278) from HARKEN
Delrin® ball bearings allow pawls to open and close effortlessly under both high and low loads; just pull the line straight down, and the cam opens and holds perfectly. Cam-Matics® Cam-Matics feature Hardkote anodized aluminum pawls, three rows of ball bearings (two on the 338), and are designed for high-load, high wear applications. Carbo-Cams® Perfect for racing boats. X-Treme Angle Fairleads Allows releasing and recleating at angles up to 90° to the cleat, unlike any other fairlead.
$3.44
|
Cam Wire Fairlead Kit from HARKEN
Plastic base, caps, and washers for Harken Cam 150.
$1.79
|
