Manual SS Series Jack Plate, 6"

Hydraulic All-in-One Jacking Plate, 6" Setback, Rocker Switch from MARINETECH PRODUCTS
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
$899.00

Hydraulic All-in-One Jacking Plate, 6" Setback, Ex-Zact Dial from MARINETECH PRODUCTS
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
$1,159.00

6" Jack Plate from MARINETECH PRODUCTS
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
$419.99

10" Jack Plate from MARINETECH PRODUCTS
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
$474.99

8" Jack Plate from MARINETECH PRODUCTS
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
$444.99

Hydraulic All-in-One Jacking Plate, 8" Setback, Ex-Zact Dial from MARINETECH PRODUCTS
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
$1,259.00

Hydraulic All-in-One Jacking Plate, 8" Setback, Rocker Switch from MARINETECH PRODUCTS
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
$949.00

6" Atlas Hydraulic Jack Plate from T-H MARINE
T-H Marine introduces the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today, even the big four strokes. Its innovative high-tech engineered polymer rod and slot lifting design guarantees trouble-free action. This plate also features the newest concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and self-contained lifting action.
$1,100.00

4" Atlas Hydraulic Jack Plate from T-H MARINE
T-H Marine introduces the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today, even the big four strokes. Its innovative high-tech engineered polymer rod and slot lifting design guarantees trouble-free action. This plate also features the newest concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and self-contained lifting action.
$1,100.00

Bent Wrench from MARINETECH PRODUCTS
The only jack plate you can adjust from inside the boat with only one screwThe only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
$27.99

Deck Plate, 3-3/8"dia. x 1-15/16"H, 2,250lb. SWL from SCHAEFER
Swivel base for deck mounting blocks.
$57.99