Control Handle - Throttle 963SB-55 from EDSON CORPORATION
Highly polished, investment cast stainless steel, marked "Fast-Slow" and "Fwd-Rev". Designed to fit Edson Dual Lever Engine Controls.
$72.99
|
PowerKnob from EDSON CORPORATION
Instantly improve your boat handling! Steer your boat like a pro with the Edson Pro Series PowerKnob. Made of marine 316 stainless, this knob turns on two rows of Delrin ball bearings for smooth operation. Easy-to-mount strap-on design includes tool for installation. Fits all wheel rims 5/8" to 1-1/8" diameter.
$89.99 $89.99
|
Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
$314.99
|
Standard 3/4" Wheel Nut from EDSON CORPORATION
Necessary to fix a destroyer wheel on your existing wheel shaft. Standard model is a polished stainless hexagonal nut. Quick Release model is a 2" dia. cast stainless knurled knob, which can be removed by hand. Fit Edson standard shafts (1"-14), except 303884, which fits 3/4"-10 shafts. Each ShWt 0.
$54.99
|
Pedestal Steering Brake from EDSON CORPORATION
Especially handy on long runs or when operating under power, this brake can secure the wheel under most conditions and will hold the boat on course while the helmsman trims a sheet or goes below. The brake can always be overridden by the helmsman. Constructed of bronze with long-lasting linings, includes a stainless shaft and brake knob. For safety, the handle is designed to pop off if a line is tangled around it. Pre-drilled holes allow installation in about 20 minutes.
$192.99
|
44" Destroyer Wheel from EDSON CORPORATION
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
$795.00
|
28" Destroyer Wheel from EDSON CORPORATION
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
$459.99
|
32" Destroyer Wheel from EDSON CORPORATION
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
$519.99
|
Sportsman's Powerknob from EDSON CORPORATION
Twin races full of super-smooth ball-bearings makes quick turns effortless while backing down on a fish, docking or maneuvering in tight quarters. Easy installation gets you out on the water quickly with the ultimate in steering control.
$59.99 $49.99
|
24" Destroyer Wheel from EDSON CORPORATION
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
$410.00
|
26" Destroyer Wheel from EDSON CORPORATION
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
$420.00
|
