Gudgeon for 1-1/2" Rudder Thickness, 6-9/16" Strap Length, 1" Strap Width, 1/2" Pin Hole from SCHAEFER
These gudgeons are built for 1/2" pins. Use with heavy-duty transom gudgeon (Model 252221) and gudgeon pin (Model 252239). Each requires 1/4" RHMS.
$107.99
|
Gudgeon for 1-1/2" Rudder Thickness, 3-5/16" Strap Length, 1" Strap Width, 1/2" Pin Hole from SCHAEFER
These gudgeons are built for 1/2" pins. Use with heavy-duty transom gudgeon (Model 252221) and gudgeon pin (Model 252239). Each requires 1/4" RHMS.
$97.99
|
Heavy Duty Fixed Outrigger - 18' Silver/Blk from WEST MARINE
Both the black/gold and silver/black poles are 15', four section anodized aluminum poles with color trim rings and stainless steel line guides. Available in your choice of silver with black trim rings or black with gold trim rings. Fits outrigger holder with a 1-1/8" ID tube. HD models for use with 1-1/2" ID tube. 15' telescoping, three-section, heavy duty fiberglass outriggers feature heavy line guides for easy rigging. 1-1/8" base will fit most outrigger holders.
$479.99 $509.00
|
Heavy-Duty 4-Cycle Engine Oil, SAE 15W-40, Gallon from PENNZOIL
Heavy-duty, 4-stroke marine oil protects engine, even under severe conditions Provides outstanding protection for diesel and four-cycle inboard/outboard gasoline engines in marine environments. High viscosity and film strength provide protection in high speed/high load applications. Helps reduce corrosive wear. Meets or exceeds major manufacturers' warranty requirements and API service CI-4/SL (15W-40 only), CF-4, CF-2, CF/SJ. Exceeds Original Equipment Manufacturer’s warranty.
$16.99 $16.99
|
Heavy Duty Fixed Outrigger - 15' Black/Gold from WEST MARINE
Both the black/gold and silver/black poles are 15', four section anodized aluminum poles with color trim rings and stainless steel line guides. Available in your choice of silver with black trim rings or black with gold trim rings. Fits outrigger holder with a 1-1/8" ID tube. HD models for use with 1-1/2" ID tube. 15' telescoping, three-section, heavy duty fiberglass outriggers feature heavy line guides for easy rigging. 1-1/8" base will fit most outrigger holders.
$364.99 $419.99
|
Heavy Duty Holding Tank, 18 Gal. from TODD ENTERPRISES
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
$234.99
|
Heavy Duty Holding Tank, 24 Gal. from TODD ENTERPRISES
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
$179.99
|
Heavy Duty Holding Tank, 13 Gal. from TODD ENTERPRISES
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
$144.99
|
Heavy Duty C Series Flush Mount Rod Holders, 15deg. from C E SMITH
Super touch stainless rodholders for big rods and big fish. Highly polished silver finish, with a heavy-duty 100% welded tube-to-cap joint that won't break out. Super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. 10 1/2" in length, 1 7/8" in diameter.
$119.99
|
Heavy-Duty 4-Cycle Engine Oil, SAE 30, Gallon from PENNZOIL
Heavy-duty, 4-stroke marine oil protects engine, even under severe conditions Provides outstanding protection for diesel and four-cycle inboard/outboard gasoline engines in marine environments. High viscosity and film strength provide protection in high speed/high load applications. Helps reduce corrosive wear. Meets or exceeds major manufacturers' warranty requirements and API service CI-4/SL (15W-40 only), CF-4, CF-2, CF/SJ. Exceeds Original Equipment Manufacturer’s warranty.
$16.99 $16.99
|
Heavy Duty Holding Tank, 36 Gal. from TODD ENTERPRISES
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
$214.99
|
