Captive Ball Bearing Spinnaker Pole Cars

Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
$240.17

Spinnaker Pole Stanchion Mount, 2.5" Diameter from JOHNSON, C.S.
This spinnaker pole stanchion mount makes storage and quick retrieval simple. One end of the pole is slid through the vinyl coated wire loop of the aft holder. The front end of your pole is securely snapped onto the bail of the forward holder. Available in three sizes based on pole diameter.
$52.99

Spinnaker Pole Stanchion Mount, 3" Diameter from JOHNSON, C.S.
This spinnaker pole stanchion mount makes storage and quick retrieval simple. One end of the pole is slid through the vinyl coated wire loop of the aft holder. The front end of your pole is securely snapped onto the bail of the forward holder. Available in three sizes based on pole diameter.
$49.99

Spinnaker Pole Stanchion Mount, 3.5" Diameter from JOHNSON, C.S.
This spinnaker pole stanchion mount makes storage and quick retrieval simple. One end of the pole is slid through the vinyl coated wire loop of the aft holder. The front end of your pole is securely snapped onto the bail of the forward holder. Available in three sizes based on pole diameter.
$62.99

600mm Low-Beam Track, 1.97' Length, 1-31/32" Hole Spacing from HARKEN
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
$25.33

1m Low-Beam Track, 3.28' Length, 1-31/32" Hole Spacing from HARKEN
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
$41.35

Ti-Lite Car (use with 29mm or 40mm Carbo Ti-Lite Blocks), 2-3/16" Length, 310lb. SWL from HARKEN
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
$70.81

Micro Car with Control Blocks, 3-7/16" Length, 310lb. SWL from HARKEN
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
$104.51

Micro Car with Pivoting Shackle, 2-3/16" Length, 310lb. SWL from HARKEN
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
$80.45

Micro Track Endstops (Pair), 1-1/16" Length, 1/8" Height above Track from HARKEN
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
$5.69

Control Blocks (Pair), 1-5/6" Length, 3/4" Height above Track from HARKEN
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
$29.16