Jib Rollers

SR-3 Sail Saver™ Jib Roller from FORESPAR
The unique patented design of these jib rollers makes them easy to snap on around stays and lifelines to protect your sails from chafe. When used on lifelines, Sail Savers™ help skirt the foot of the jib. They can also be used on the backstays of catamarans or other boats with large roached mainsails. Center hole is 3/16" and can be drilled out to 3/8" maximum. Two halves slide together and lock in place while two included safety clips snap on for added security.
$17.99

300 Hoyt Jib Boom, 3.0"OD Tubing Dia., 24lb., 11'L Boom Tube, 30'–35'L Boats from FORESPAR
Proven on over 1,000 sailboats and numerous trans-oceanic passages As your boat bears off downwind, and the sheets are eased, the Hoyt Jib Boom maintains precise control of the jib’s leach. This results in remarkable performance improvement and ease of handling. This is not a critical location, but rather a rule of thumb. All knuckles are bent to 57 degrees. All angles are calculated on a perfectly flat and level deck. Wedges will be required on many installations to make up for deck camber.
$1,355.00

250 Hoyt Jib Boom, 2.0"OD Tubing Dia., 16lb., 6'L Boom Tube, 25'–29'L Boats from FORESPAR
Proven on over 1,000 sailboats and numerous trans-oceanic passages As your boat bears off downwind, and the sheets are eased, the Hoyt Jib Boom maintains precise control of the jib’s leach. This results in remarkable performance improvement and ease of handling. This is not a critical location, but rather a rule of thumb. All knuckles are bent to 57 degrees. All angles are calculated on a perfectly flat and level deck. Wedges will be required on many installations to make up for deck camber.
$1,045.00

350 Hoyt Jib Boom, 3.5"OD Tubing Dia., 37lb., 13'L Boom Tube, 35'–42'L Boats from FORESPAR
Proven on over 1,000 sailboats and numerous trans-oceanic passages As your boat bears off downwind, and the sheets are eased, the Hoyt Jib Boom maintains precise control of the jib’s leach. This results in remarkable performance improvement and ease of handling. This is not a critical location, but rather a rule of thumb. All knuckles are bent to 57 degrees. All angles are calculated on a perfectly flat and level deck. Wedges will be required on many installations to make up for deck camber.
$1,790.00

Pivoting Self-Launch Bow Roller from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
$154.99

Roller Bunks - 5' from C E SMITH
These roller bunks fit right on top of your existing boards and provide a smooth-rolling surface with dramatically less friction than carpet. 12-gauge galvanized steel frame. Durable, non-marking rollers and end caps. 4' length has 5 rollers. 5' length has 6 rollers.
$169.99

Jib Lead with Bullseye & Swivel, Port from HARKEN
For dinghies and small sportboats with jibs to 140sq. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot angle so the cleat is always within easy reach, and features a 356 Carbo-Cam on a lightweight aluminum cam arm. Boat Size: Dinghies/ small sportboats, jibs to 140 sq. Cam: 57° cam arm rotation . Cleat Type: 365 Carbo-Cam with 424B Flairlead, #10 FHMS .
$85.3 $85.30

Roller Shade/Screen, 25-3/8"L x 23-5/16"W from LEWMAR
The new Roller Shade and Screen, is a tough multi-functional hatch accessory, which features an integral black-out screen and fly screen. The Roller Shade Screen will enhance Lewmar's most popular hatch sizes from the current Low and Medium profile ranges. The components offer versatile fitting options such as installing the trim and cassette roller as an integral part to an existing hatch or adding the cassette roller at a later date.
$244.99

Medium Platform Bow Anchor Roller, 3-3/8" Width; 3/8" (4) Fasteners from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
$84.00

3" Roller Cap (RP-325) from STOLTZ
Resilient, shock-absorbent, non-marking Super Rollers are made from high-quality polyurethane to protect your investment. They spin freely to reduce drag while launching or retrieving your boat and remain uneffected by oil, gas or salt. Should last the lifetime of your trailer. Made in the U. S. A.
$3.99

Bow Universal Anchor Roller, 18" Length, 3-1/2" Width; 3/8" (3) Fasteners from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
$166.00