Stainless Steel End-In Blend Base for 7/8" OD Tube

Narrow Stainless-Steel Louvered Vent, 9/16" from ATTWOOD
Suitable for installation on any flat area of most contoured hulls. Constructed of all-welded 304 stainless with a polished finish. Vents for use with 3"ID ventilation systems and require a 1343 collector box. Install with #6 screws. Type: Louvered . Material: Stainless steel. Dimensions: 3"W x 16-7/8"L . Cutout Size: 2-7/16"W x 16-3/16"L .
$41.99

Narrow Stainless-Steel Louvered Vent, 1/16" from ATTWOOD
Suitable for installation on any flat area of most contoured hulls. Constructed of all-welded 304 stainless with a polished finish. Vents for use with 3"ID ventilation systems and require a 1343 collector box. Install with #6 screws. Type: Louvered . Material: Stainless steel. Dimensions: 3"W x 16-7/8"L . Cutout Size: 2-7/16"W x 16-3/16"L .
$42.99

304 Stainless-Steel Hose Clamp, 1/2" to 7/8", SAE Size 6 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.39

304 Stainless-Steel Hose Clamp, 1" to 1-5/8", SAE Size 18 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.49

Stainless-Steel Rub Strake, 3/4"W x 8"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
$15.99

Side Socket from SEAFIT
316 Stainless steel sockets accept oarlocks with 1/2" OD straight shanks.
$25.99

Top Socket from SEAFIT
316 Stainless steel sockets accept oarlocks with 1/2" OD straight shanks.
$25.99

Edge Socket from SEAFIT
316 Stainless steel sockets accept oarlocks with 1/2" OD straight shanks.
$25.99

Suncor Stainless Steel Anchor Shackle, 7/8", WLL 8000 lb. from SUNCOR
Anchor Shackle, 316NM made of stainless steel with oversized screw pin.
$64.99

Suncor Stainless Steel Anchor Shackle, 5/8", WLL 4000 lb. from SUNCOR
Anchor Shackle, 316NM made of stainless steel with oversized screw pin.
$23.99

6" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
$67.99