Snatch Blocks

Small Snatch Block, Line Dia. to 1/2", 1,980lb. SWL from WICHARD
This unique snatch block, built around a one-piece forged stainless steel head, is strong and simple to operate. The block’s swivel head is set into a forged arm that swings open with the pull of a release pin. A trunnioned snap shackle allows the block to rotate on two axes for proper block and load alignment. Sheave: Plastic. Cheek Material/Finish: Soft elastomer plastic. Bearings: None. Opening: Pin and swivel arm.
$182.99 $182.99

Cam Lock Snatch Block, 3-3/4" Dia., 5/8" Sheave Line Dia., 3,310lb. Max. SWL from RONSTAN
The improved latch mechanism makes these snatch blocks easy to open and close even with wet, cold hands. A small lever by the opening gate operates with light finger pressure to release the gate and allow lines in and out. All stainless construction with a hardcote anodized aluminum sheave. Stainless roller bearings are easily lubricated. Sheave: Anodized aluminum. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings. Opening: Cam Lock.
$253.51 $253.51

Cam Lock Snatch Block, 1-3/4" Dia., 5/8" Sheave Line Dia., 3,310lb. Max. SWL from RONSTAN
The improved latch mechanism makes these snatch blocks easy to open and close even with wet, cold hands. A small lever by the opening gate operates with light finger pressure to release the gate and allow lines in and out. All stainless construction with a hardcote anodized aluminum sheave. Stainless roller bearings are easily lubricated. Sheave: Anodized aluminum. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings. Opening: Cam Lock.
$182.54 $182.54

Medium Snatch Block from SCHAEFER
Snatch blocks are one of the most versatile tools available for racing or cruising. The flexibility of these blocks makes them ideal for use as Genoa leads, spinnaker controls, or short sheet leads for jibs. Investment cast snap shackle head attaches to the block with a ball joint swivel. The key feature however, is that the block cage can be opened allowing a line to be inserted at any point, rather than being reeved (run through the end) as with conventional blocs.
$330.99 $330.99

Small Snatch Block from SCHAEFER
Snatch blocks are one of the most versatile tools available for racing or cruising. The flexibility of these blocks makes them ideal for use as Genoa leads, spinnaker controls, or short sheet leads for jibs. Investment cast snap shackle head attaches to the block with a ball joint swivel. The key feature however, is that the block cage can be opened allowing a line to be inserted at any point, rather than being reeved (run through the end) as with conventional blocs.
$229.99 $229.99

Superbuff Compound Pad - 2+2 for 5/8" Polisher from 3M PRODUCTS
Quality pads yeild great resultsDesigned for use with standard 5/8" shaft polishers, Buffing and Polishing Pads feature unique 100% wool double-face construction with a built-in lightweight support pad. 2+2 pad offers additional flexibility and longer life. Attach to buffer with adapter. Double-walled construction allows both sides of pad to be used. Lightweight support pad eliminates need for heavy backup.
$44.99

Snatch Block, High-Load Style with Trunnion, 3,500lb. SWL from HARKEN
The recessed push button on these blocks allows quick one-handed operation for receiving or removing a line. Features Harken’s low-friction roller bearings for sheave loads and ball bearings for side loads. Snap shackles attach to pad eyes and bails, while trunnion shackles attach to toerails and other fixtures where an ordinary snap shackle will not align with the load. : 5/8". Sheave: Glass-filled Delrin® . Bearings: Ball and roller bearings . Opening: One-handed push button .
$342.3 $342.30

35' Boat Size Snatch Block, 1-3/4" Sheave Dia., 5/8" Line Dia., 3,530lb. Max. SWL from RONSTAN
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
$134.74 $134.74

35' Boat Size Snatch Block with Trunnion, 1-3/4" Sheave Dia., 5/8" Line Dia., 3,310lb. Max. SWL from RONSTAN
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
$172.99 $172.99

24' Boat Size Snatch Block, 2" Sheave Dia., 7/16" Line Dia., 1,100lb. Max. SWL from RONSTAN
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
$100.51 $100.51

24' Boat Size Snatch Block with Trunnion, 2" Sheave Dia., 7/16" Line Dia., 1,100lb. Max. SWL from RONSTAN
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
$106.39 $95.75