Medium-Duty Gudgeon

Heavy-Duty Gudgeon Pin from SCHAEFER
For heavy-duty gudgeon-to-gudgeon connection. Dimensions: 1/2"dia.
$43.99

Upper Pintle, 1" Rudder Thickness, 3-1/2" Strap Length, 1" Strap Width, 1-3/4" Pin Length from SCHAEFER
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
$48.99

Lower Pintle, 1" Rudder Thickness, 7-1/2" Strap Length, 1" Strap Width, 2-3/4" Pin Length from SCHAEFER
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
$64.99

Upper Pintle, 1-1/2" Rudder Thickness, 3-3/8" Strap Length, 1" Strap Width, 1-3/4" Pin Length from SCHAEFER
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
$48.99

Lower Pintle, 1-1/2" Rudder Thickness, 7" Strap Length, 1" Strap Width, 2-3/4" Pin Length from SCHAEFER
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
$62.99

Medium-Duty Foot Pump from WEST MARINE
About half the capacity of the heavy duty model, with no pressure gauge.
$59.99

C-Shape Gard® Coil - 1 at 25' L from TAYLOR
This versatile extrusion can be mounted both vertically and horizontally to nearly all dimensional lumber sizes. It has been designed to function either as a side guard profile or as an edge guard for light- to medium-duty applications. Lenth Options are one 8' Straight or two 8' Retail Pack or one 25' Coil. 3 5/8" H x 1 1/2". Material: White vinyl with foam core. Shock Absorption Mechanism: Flexible padding. Attachment Method: Screws or nails (not included).
$54.99 $54.99

250 Cub/min, 24V DC, 4" In, 3-5/8" Out, 8-3/4"L x 8-3/4"W x 9"H from JABSCO
Designed to remove gasoline vapors from enclosures, these blowers are also a medium-duty, versatile means of exhausting warm air from galleys and engine rooms, ventilating odors or steam from heads and general marine air circulation. Constructed of a tough reinforced plastic housing . One-piece balanced plastic rotor f. Maximum corrosion-resistance in marine environments.
$177.99

150 Cub/min, 24V DC, 3" In, 2-3/4" Out, 8"L x 6-5/8"W x 7-5/8"H from JABSCO
Designed to remove gasoline vapors from enclosures, these blowers are also a medium-duty, versatile means of exhausting warm air from galleys and engine rooms, ventilating odors or steam from heads and general marine air circulation. Constructed of a tough reinforced plastic housing . One-piece balanced plastic rotor f. Maximum corrosion-resistance in marine environments.
$167.99

ABS Rod Holder - White from WEST MARINE
These light- to medium-duty rod holders are made of high-impact ABS plastic so you‘ll never have to worry about rust Flange size is 3 1/2" x 4 1/4". Flange has a slightly textured top surface.
$7.99

C-Shape Gard® Straight - 1 at 8' L from TAYLOR
This versatile extrusion can be mounted both vertically and horizontally to nearly all dimensional lumber sizes. It has been designed to function either as a side guard profile or as an edge guard for light- to medium-duty applications. Lenth Options are one 8' Straight or two 8' Retail Pack or one 25' Coil. 3 5/8" H x 1 1/2". Material: White vinyl with foam core. Shock Absorption Mechanism: Flexible padding. Attachment Method: Screws or nails (not included).
$19.99 $19.99