Outrigger Holder, Aluminum/Stainless Steel, 1-1/2" Diameter

Round Lifting Handle, 2-1/2" Diameter from WEST MARINE
Latches, shafts and tongues are made from cast 316 marine-grade stainless steel.
$52.99

316 Stainless-Steel Hose Clamp, 2-1/4" to 3-1/4", SAE Size 42 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
$6.99

316 Stainless-Steel Hose Clamp, 2-1/2" to 3-1/2", SAE Size 48 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
$7.49

304 Stainless-Steel Hose Clamp, 2-3/4" to 3-1/2", SAE Size 48 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.89

304 Stainless-Steel Hose Clamp, 2-3/8" to 3-1/8", SAE Size 42 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.89

Chain Plate, 1-1/2"W x 14"L, 1/2" Hole Diameter from SCHAEFER
1" and 1-1/4" sizes are flat with four fastener holes. 1 1/2" size is formed (bent) with five fastener holes. Type 304 stainless-steel.
$99.99

316 Stainless-Steel Hose Clamp, 2" to 3", SAE Size 40 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
$6.49

Nine-Piece Stainless Steel Nestable Set with Dupont Teflon® Select Finish from MAGMA PRODUCTS
The onboard cook will love this versatile nine-piece cook-top and ovenware set! Stows in less than 1cu. ft. 18-9 stainless steel, it includes three saucepans (1 1/2qt. , 2qt. and 3qt. ), one lid that fits the saucepans, a 5qt. stock pot, a 9 1/2"dia saute pan, two removable handles and a bungee storage cord.
$234.99

316 Stainless-Steel Hose Clamp, 2-3/4" to 3-3/4", SAE Size 52 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
$7.49

304 Stainless-Steel Hose Clamp, 2" to 2-3/4", SAE Size 36 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.79

Euro Take Apart Hinge - 2 5/8"x 1 1/2" Right from WEST MARINE
Type 304 electro-polished stainless steel. Drilled and countersunk for #8 screws (sold separately).
$35.99