Max Prop Zinc Kit

Zinc Kit Max Prop 63mm (3/4-1 Inch) from P.Y.I. INC.
Three blade feathering propeller anodes. Each kit contains two zincs, two sets mounting screws (1ea. years 1984-2003, 1ea. 2004-current), one grease zerk, two grease port screws, allen wrenches, sandpaper and installation instructions.
$89.99

Zinc Kit Maxprop 70Mm11/8-13/8 from P.Y.I. INC.
Three blade feathering propeller anodes. Each kit contains two zincs, two sets mounting screws (1ea. years 1984-2003, 1ea. 2004-current), one grease zerk, two grease port screws, allen wrenches, sandpaper and installation instructions.
$99.99

Button Latch - 2 1/8" x 2 1/4" from PERKO
Measures: 2 1/8"W x 2 1/4"L Requires six #6 FH fasteners.
$39.99

Mercury Short Skeg Anode, 2 1/4" from SEA SHIELD
Mercury zinc skeg anodes Short - 2 1/4".
$9.99

500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
$130.9 $1,299.00

1-1/2" Thru-Hull Fitting, 2-1/4" Max. Hull Thickness, 3" Flange OD from CONBRACO
Bronze fitting recommended for connections below the waterline Includes nut Marine UL listed (except 1/2" & 3/4").
$51.99

Mast Base Lead Block, Hi-Load, 2-1/4" Sheave Dia., 3/8" Line Dia., 2,500lb. SWL from HARKEN
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
$135.79 $135.79

Mast Base Lead Block, Hi-Load Over-the-Top, 2-1/4" Sheave Dia., 3/8" Line Dia., 2,500lb. SWL from HARKEN
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball bearings and Teflon-composite bushings designed to carry the high static loads of halyards. Sheave: 1-3/4". Sheave Size: 1986: 1-3/4" (44mm); 1988 & 3002: 2-1/4" (57mm).
$135.79 $135.79

1-1/4" Thru-Hull Fitting, 2" Max. Hull Thickness, 2-3/4" Flange OD from CONBRACO
Bronze fitting recommended for connections below the waterline Includes nut Marine UL listed (except 1/2" & 3/4").
$38.99

Sheet Rolls - 80A-Grit, 2 3/4" x 45 yds from 3M PRODUCTS
Tough, paper backed rolls offer a long life and a consistent finish. Aluminum oxide mineral. Abrasive Material: Aluminum oxide . Recommended Usage: Fiberglass or wood fairing applications . Backing Type: Paper . Sheet Size: 2 3/4"W .
$97.99

Sheet Rolls - 150A-Grit, 2 3/4" x 45 yds from 3M PRODUCTS
Tough, paper backed rolls offer a long life and a consistent finish. Aluminum oxide mineral. Abrasive Material: Aluminum oxide . Recommended Usage: Fiberglass or wood fairing applications . Backing Type: Paper . Sheet Size: 2 3/4"W .
$77.99