Pedestal Maintenance and Rebuild Kits

Pedestal Maintenance Kit from EDSON CORPORATION
Three kits: Maintenance Kit includes two snap rings, two spare shaft keys, a 1/2oz. tube of white Teflon lubricant and Loctite 242. Rebuild Kit includes snap rings (2), shaft keys (3), needle bearing sets (2), nylon washers, an O-ring, Locktite 242, a white Teflon lubricant, and a complete Pedestal Maintenance Guide.
$54.1 $48.99

Pedestal Rebuild Kit from EDSON CORPORATION
Three kits: Maintenance Kit includes two snap rings, two spare shaft keys, a 1/2oz. tube of white Teflon lubricant and Loctite 242. Rebuild Kit includes snap rings (2), shaft keys (3), needle bearing sets (2), nylon washers, an O-ring, Locktite 242, a white Teflon lubricant, and a complete Pedestal Maintenance Guide.
$64.99 $59.88

Stainless-Steel Brake Knob from EDSON CORPORATION
Stainless steel knob for Edson wheel brake For Edson wheel pedestal brakes, a highly-polished, stainless-steel brake knob to directly replace Edson’s plastic model.
$77.99

18" Chain, 9' Wire Kit from EDSON CORPORATION
Pre-assembled with one length of roller chain and two lengths of wire. The connections between wire and chain are covered in clear shrink plastic to prevent fouling. All roller chain and wire rope are stainless, and the chain end fittings are cotter-pinned for ease of maintenance. Now includes connecting hardware/ tensioning kit.
$329.99

24" Chain, 13' Wire Kit from EDSON CORPORATION
Pre-assembled with one length of roller chain and two lengths of wire. The connections between wire and chain are covered in clear shrink plastic to prevent fouling. All roller chain and wire rope are stainless, and the chain end fittings are cotter-pinned for ease of maintenance. Now includes connecting hardware/ tensioning kit.
$469.99

Guard Feet Kit from EDSON CORPORATION
Stainless guard feet secure the guard to the cockpit sole. Fits existing mounting position as original black plastic feet. Kit includes two feet, deck guards, bolts, set screws and bushings.
$69.99

Pedestal Compass Cover from EDSON CORPORATION
UV-resistant white vinyl laminate. Secures with a Velcro tie Fits 5"-7" dia.
$52.99

Pedestal Steering Brake from EDSON CORPORATION
Especially handy on long runs or when operating under power, this brake can secure the wheel under most conditions and will hold the boat on course while the helmsman trims a sheet or goes below. The brake can always be overridden by the helmsman. Constructed of bronze with long-lasting linings, includes a stainless shaft and brake knob. For safety, the handle is designed to pop off if a line is tangled around it. Pre-drilled holes allow installation in about 20 minutes.
$192.99

Teak Steering Cockpit Table - Drop Leaf, Pedestal-Mount, 9 1/2" from EDSON CORPORATION
Formed wire brackets hold the table in the up position Solid teak tables to turn your cockpit into an entertainment center Clips secure the table to your pedestal guard in the down position Drop Leaf Tables Dimensions-- Open: 27” x 26”, Closed: 27” x 13” Luncheon Tables Dimensions: 13 1/2” x 24”.
$999.00

Leather Wheel Kit, 29" to 40" Wheel from EDSON CORPORATION
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
$199.99

Leather Wheel Kit, 21" to 28" Wheel from EDSON CORPORATION
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
$177.99