Thruhull Bait Pump - 1100 gph from KODIAC
You won't have to worry about salt rushing out this pump! Nob-corrosive design will stand up to even the harshest environment Low amperage per gallon of water output Useful for boats with limited charging systems All pumps are whisper quiet, so you won't scare the fish away Direct thruhull mounting 3/4" female thread.
$89.99
|
Rule 800GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).
$99.99
|
Rule 110GPH 12VTransom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).
$99.99
|
Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).
$84.99
|
Seawater Circulation Pump, 320 gph from CAL PUMP
Seaweed-clogged intakes will cause marine air conditioning pumps to run dry, burning out the motor of most pumps. These sturdy, stainless steel and bronze pumps have thermal overload protection and can run dry without failing. The pump motor is permanently sealed in nontoxic lubricant for years of reliable running. Can be submerged. Pumps are not self-priming and must be located below the waterline. Operates on 110V AC. Each pump is UL-listed, ABYC-compliant and USCG-approved.
$109.99
|
Seawater Circulation Pump, 580 gph from CAL PUMP
Seaweed-clogged intakes will cause marine air conditioning pumps to run dry, burning out the motor of most pumps. These sturdy, stainless steel and bronze pumps have thermal overload protection and can run dry without failing. The pump motor is permanently sealed in nontoxic lubricant for years of reliable running. Can be submerged. Pumps are not self-priming and must be located below the waterline. Operates on 110V AC. Each pump is UL-listed, ABYC-compliant and USCG-approved.
$164.99
|
Seawater Circulation Pump, 1200 gph from CAL PUMP
Seaweed-clogged intakes will cause marine air conditioning pumps to run dry, burning out the motor of most pumps. These sturdy, stainless steel and bronze pumps have thermal overload protection and can run dry without failing. The pump motor is permanently sealed in nontoxic lubricant for years of reliable running. Can be submerged. Pumps are not self-priming and must be located below the waterline. Operates on 110V AC. Each pump is UL-listed, ABYC-compliant and USCG-approved.
$189.99
|
4000gph Pump, 1-1/2" & 2" Port Sizes, 15A @ 12V DC, 8-1/2"H x 4-3/4"dia. from JOHNSON PUMPS
Designed to meet and exceed the tough demands of commercial and recreational duty, these pumps feature a 12-pole motor with double ball bearings for extended service life. 2200 and 4000 GPH models incorporate a mechanical seal design that eliminates shaft wear. Outlet port check valve included for optional use. Features: Double ball-bearing motors for extended service life . Type: Submersible centrifugal electric bilge pump . Port Sizes: 1-1/8"–2" . Built-In Switch: No .
$169.99
|
1600gph Pump, 1-1/8" & 2" Port Sizes, 7A @ 12V DC, 5-7/8"H x 4-1/4"dia. from JOHNSON PUMPS
Designed to meet and exceed the tough demands of commercial and recreational duty, these pumps feature a 12-pole motor with double ball bearings for extended service life. 2200 and 4000 GPH models incorporate a mechanical seal design that eliminates shaft wear. Outlet port check valve included for optional use. Features: Double ball-bearing motors for extended service life . Type: Submersible centrifugal electric bilge pump . Port Sizes: 1-1/8"–2" . Built-In Switch: No .
$72.99 $72.99
|
2200gph Pump, 1-1/8" & 1-1/4" Port Sizes, 8.6A @ 12V DC, 7"H x 4-1/4"dia. from JOHNSON PUMPS
Designed to meet and exceed the tough demands of commercial and recreational duty, these pumps feature a 12-pole motor with double ball bearings for extended service life. 2200 and 4000 GPH models incorporate a mechanical seal design that eliminates shaft wear. Outlet port check valve included for optional use. Features: Double ball-bearing motors for extended service life . Type: Submersible centrifugal electric bilge pump . Port Sizes: 1-1/8"–2" . Built-In Switch: No .
$89.99 $89.99
|
Surface Mount Urchin Bilge Pump from WHALE PUMPS
Manual bilge pump that works well for small to medium-sized boats. Stepped inlet/outlet nipples accommodate 1" and 1-1/2" hose connections. Infinitely variable handle/flow positions. Surface mount has fixed handle. Thru-deck mount has removable handle. gpm: 14. 5 . Material: Acetal copolymer . Dimensions: 11-3/4"H x 9-3/4"W x 10-7/8"L . Port Sizes: 1" or 1-1/2" .
$64.99
|
