5 Stud Galvanized Hub Kits

Silver Mid-Mount Rod Holder, 1 1/4" and 1 5/16" OD from C E SMITH
Want clean lines and an adjustable mount?Clamp angle adjusts in 10 deg. increments. Adjusting teeth are hidden for a clean look. Strong, four-screw mounting clamp resists slipping. Includes a white vinyl liner and integrally-cast gimbal pin. Angle Adjusts in 10° increments. Fits rails with ODs of 1-1/16", 1" or 7/8".
$129.99

Drain Fitting, 1-1/4" NPT, Straight from AMBASSADOR MARINE
Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90° drain’s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose.
$36.99

Spindle Shape Tapered, Spindle Diameter 1 1/16" & 1 3/8", Max Hub Capacity 1,750lb from TIEDOWN ENGINEERING
Basic replacement hub kits include bearings, seals, dust cap, cotter key and lug nuts or bolts. Fully greased bearings and hub cavity.
$79.99

Dinghy Block, Thru-Deck (1-1/16" x 2-1/16" cutout), 350lb., 4.0oz. from HARKEN
Sleek dinghy sheet blocks or control blocks on larger boats. Low-profile in-head shackle (on non-swivel blocks) can be upset. Light-duty use only—not meant for use on heavy course-racing keelboats or scows. Where applicable, blocks use #8 fasteners. Sheave Size: 1-3/4" (44mm). Ball Bearings: Delrin ball bearings. Line Diameter: 3/8" max. Cheek Material/Finish: Plastic/stainless. Shackle/Strap Type: In-head shackle; minimizes block length; dual-axis orientation.
$35.99

hru-Deck Bullet Block, 500 SWL (Cutout: 13/16" x 1-3/4") from HARKEN
Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheaves are aluminum for strength. Sheave: Teflon® impregnated Hardkote anodized aluminum . Bearings: Delrin® roller bearings . Sheave Size: 1-1/8" (29mm) . Line Dia. 5/16" max. . Cheek Material/Finish: Plastic with stainless strap .
$19.51

39.6gal. Flexible Water Tank, 27-1/2" x 55-1/16" from PLASTIMO
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .
$144.99

5/16" Pin Dia., 3/4" Inside Width, 1-1/16" Inside Length, 2,550lb. MWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
$54.99

Chain Plate, 1-1/4"W x 12"L, 3/8" Hole Diameter, 3/16" Thick from SCHAEFER
1" and 1-1/4" sizes are flat with four fastener holes. 1-1/2" size is formed (bent) with five fastener holes. High-quality stainless steel.
$74.99

Flush Lock - Chrome/Black with Straight Cam Bar from PERKO
Chrome plated zinc alloy and black plastic with straight cam bar and flexible plastic strike plate. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 1-1/16" to 2-9/16" .
$46.99

200 Series Fairlead Block, Fixed, 1-5/8" x 19/32" from SCHAEFER
Extremely low profile, fixed fairlead block keeps control lines and halyards close to the deck. The hinged version is for mounting on spars or on deck. It adjusts to variable halyard and control line angles to provide a proper lead, and its narrow base plate allows multiple mounts. Both have open race ball bearings to allow salt, dirt and debris to be easily flushed out. Sheave: UV-stabilized white Delrin®. Sheave Size: 1-1/16" (27mm). Cheek Material/Finish: Polished stainless.
$24.99

2.25" Block, Single with Becket, 500lb. SWL, 5.0oz. from HARKEN
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
$43.61