Skid-No-More Paint

Skid-No-More - Gallon from EVERCOAT
Textured, skid-resistant acrylic latex coating for docks, ramps, steps or poolside. Excellent alternative to nonskid tape. Light gray color can be tinted using gel coat coloring agents. Easy-to-apply nonskid coating for deck or dock. Use in place of nonskid tape. Light gray color can be tinted using coloring agents.
$69.99

Pure Oceans Non-Skid Deck Cleaner, Quart from WEST MARINE
The highly effective foaming action of this cleaner lifts dirty residue away from nonskid surfaces with no hard scrubbing required.
$9.99 $9.99

Two-Part Pour Foam Kit - 2 Quarts from EVERCOAT
Excellent for creating icebox insulation Two-quart kit mixes in 1:1 ratio. Use for adding icebox or sound deadening insulation and additional flotation. Expands to 2cu. ft. or 25 times its volume. Create or add to existing flotation. Improve your ice boxes insulation.
$99.99

Surfacing Resin - Quart from EVERCOAT
For the final coat—cures tack-freeFinal-coat polyester resin cures tack-free, regardless of exposure to air or previous resin coats. May be used over soft wood, fiberglass and metal. If more than one coat of this resin is applied, sanding is required between coats. Catalyst included. Formulation: Polyester surfacing resin. Recommended Usage: Final coat resin; cures when exposed to air . Cure Time: 4 hrs Recoat Time: 30 minutes.
$32.99

Acetone - Quart from EVERCOAT
Effective for metal cleaning, epoxies, vinyls, lacquers, solvent-based contact cement or adhesives, plastic and polyester resins and fiberglass.
$17.99

Polyester Laminating Resin - Quart from EVERCOAT
Remains tacky for adhesion to fiberglass layupsRemains tacky. For multiple fiberglass layups and holding fiberglass on vertical surfaces during layup. Not for final coat. Catalyst included. Formulation: Polyester Laminating Resin. Recommended Usage: Laminating multiple layers of mat and cloth . Cure Time: 4 hours .
$34.99

Polyester Catalyst for Quart from EVERCOAT
A liquid methyl ethyl ketone-peroxide (MEK-P) hardener. For use with all polyester resin and gelcoat. . Graduated measure for mixing convenience.
$4.99

Marine Surfacing Putty - Quart from EVERCOAT
Versitile putty repairs scrapes, gouges, dings and dentsQuick, easy, permanent fiberglass, wood or metal repair. May be mixed with coloring agent. Formulation: Polyester putty Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals Color: White, may be mixed with coloring agent to tint to desired shade. Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals.
$33.99

Formula 27 Filler - Quart from EVERCOAT
Polyester filler for reliable dent, ding and gouge repairsQuality water-resistant, extra-white plastic filler for filling dents in wood, fiberglass and metal. Won’t sag. Includes hardener. Formulation: White polyester filler . Recommended Usage: Fills dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals. Color: White, may be mixed with coloring agent to tint to desired shade. Does not shrink after curing. Won't crack or pop out.
$31.99

Polyester Glazing Putty - Quart from EVERCOAT
Ultra-smooth surfacing putty can be applied over roughly sanded fiberglass, metal or filler surfaces.
$39.99

Non-Skid Compound - Quart from INTERLUX
Use to create nonskid areas on deckThis paint additive is made of very fine polymeric spheres that don’t collect dirt as easily as natural grit. Mix directly into paint and brush or roll on. Ratio is 1/2pt additive to 1qt paint and 1qt to 1gal. Recommended Usage: Turns decks into nonskid surfaces . Application: Brush, roll or broadcast . Compatibility: One and two-part polyurethane, alkyd enamel. Coverage: 1/2 pint per one quart enamel.
$34.99