Gluvit Epoxy Waterproof Sealer

Gluvit Epoxy Waterproof Sealer - Quart from TRAVACO
One application of this excellent barrier coat finds, fills and seals hidden leaks and cracks in wood and fiberglass. Seals aluminum seam and rivet leaks. Abrasion- and impact-resistant, it flexes with hull or deck to prevent cracking. Compatible with most marine overcoats. Formulation: Two-part epoxy sealer . Recommended Usage: Coating and sealing wood, fiberglass, and metal. Protects wood against water absorption, isolates dry-rot, seals aluminum seams and rivets . 25 sq. ft. @ 10mil .
$62.99

Marine-Tex® Epoxy Putty, Gray, Gallon from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .
$419.99

Marine-Tex Epoxy Putty, White, Gallon from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .
$419.99

Flexible Repair Epoxy Adhesive from TRAVACO
Unique two-part adhesive adheres where others won'tThis unique two-part adhesive adheres where others won't. Easily bonds to a wide range of materials, including PVC, Hypalon®, rubber, polyurethane, glass, acrylic, steel, fiberglass, polycarbonate, wood, and aluminum. Cures to a tough flexible consistency. Excellent for inflatable boat repairs! Two-part syringe kit. Formulation: Two-part flexible epoxy adhesive/sealer. Recommended Usage: General bonding or repairs in wet or dry applications.
$25.99

U-4749 High Build Epoxy Primer - Buff, Gallon from STERLING
Part of Sterling's Linear Polyurethane System Faster curing, quicker build and easy to sand, this high-solids, low-VOC primer can be applied up to 10mils per coat by brush or spray. Apply over wood, fiberglass, gel coat, rough surfaces, fairing compounds and composites. VOC is 264 g/l un-thinned. Thin up to 25% or more with U-1289 where permissible. A mixed gallon covers about 100 sq. ft. Gallon. Primary Usage: Primer for very rough surfaces . Formulation: Low VOC epoxy high-build primer.
$234.99

30-Y-94 Epoxy Primer - Base, Gallon, (Professional Application Only) from AWLGRIP
Anticorrosive for aluminum. Needs no sanding. Spray only. Coverage: 300 sq. ft. /gal.
$184.99

30-Y-94 Epoxy Primer - Converter, Gallon, (Professional Application Only) from AWLGRIP
Anticorrosive for aluminum. Needs no sanding. Spray only. Coverage: 300 sq. ft. /gal.
$107.99

Epiglass Epoxy Resin, Pump (for Gallon) from INTERLUX
A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60°F. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) . Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. @ 50°F; 14min.
$37.99

Epiglass Epoxy Resin, Gallon from INTERLUX
A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60°F. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) . Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. @ 50°F; 14min.
$112.99

Epoxy Kit-Rapid Cure, Mini from MAS EPOXY
Mas's ONLY 1:1 ratio epoxy adhesive -- This stuff is FAST!! It's great for quick repairs and bonding. Mix small amounts - no more than 1/2 oz. of each of the resin and hardener at a time. You'll have 1-2 minutes to use it, and 5-10 minutes to set it. You can sand in 1 hour, and full cure is in 4-6 hours. Be Careful - this is FAST, PERMANENT, and WATERPROOF. The MINI, 8 oz. kits are great for keeping on board or at home in the tool kit. Useful for quick kayak and canoe - or home - repairs.
$33.99

Epoxy Kit-Rapid Cure, Pint from MAS EPOXY
Mas's ONLY 1:1 ratio epoxy adhesive -- This stuff is FAST!! It's great for quick repairs and bonding. Mix small amounts - no more than 1/2 oz. of each of the resin and hardener at a time. You'll have 1-2 minutes to use it, and 5-10 minutes to set it. You can sand in 1 hour, and full cure is in 4-6 hours. Be Careful - this is FAST, PERMANENT, and WATERPROOF. The MINI, 8 oz. kits are great for keeping on board or at home in the tool kit. Useful for quick kayak and canoe - or home - repairs.
$43.99