Head Sock

1-1/8" Marelon Mushroom Head from FORESPAR
253 Series Hose tailpipe/Mushroom Head.
$19.99

Head & Holding Tank Neutralizer & Flush, Pint from WEST MARINE
Use this preparation to neutralize, flush, and prepare your head and holding tank for use with new treatments. Eliminates cross contamination which can render a holding tank treatment useless when switching from one type to another. Also ideal for spring commissioning or as preparation for winter layup.
$11.99

Crown Head Pump Assembly, Post-January 1988, #CH102MW from RARITAN
Raritan CH102MW Crown Head Complete Inlet Pump Ass'y Post 1988.
$184.99

1/2" Threaded Marelon Mushroom Head, 2"L from FORESPAR
Marelon 251 Series Full Threaded/Mushroom Head Thru-Hull Connectors Forespar® series of the Thru-Hull Connectors are precision molded in high strength Marelon®. Their great strength, light weight and complete freedom from corrosion and electrolysis make them the ideal Thru-Hull Connectors for use above or below the waterline. All Thru-Hull Connectors must be installed with proper bedding compound. CF 2505 ½), indicates a Thru-Hull Connector that has been fitted with a strainer. Full threaded.
$12.99

1" Marelon Mushroom Head, 2-3/8"L from FORESPAR
253 Series Hose tailpipe/Mushroom Head.
$15.99

1" Threaded Marelon Mushroom Head, 2-3/8"L from FORESPAR
Marelon 251 Series Full Threaded/Mushroom Head Thru-Hull Connectors Forespar® series of the Thru-Hull Connectors are precision molded in high strength Marelon®. Their great strength, light weight and complete freedom from corrosion and electrolysis make them the ideal Thru-Hull Connectors for use above or below the waterline. All Thru-Hull Connectors must be installed with proper bedding compound. CF 2505 ½), indicates a Thru-Hull Connector that has been fitted with a strainer. Full threaded.
$15.99

7 Series Universal Head Block, Single, Aluminum Cheeks, 7.4oz from SCHAEFER
Universal head allows one block to function as a front shackle, side shackle, or swivel shackle block. Large sheave diameter and high working loads make them suitable for sheet and control blocks on medium to large offshore boats. Beckets are removable. 704 series are aluminum; 705 blocks are stainless. Where applicable, blocks use 1/4'' fasteners. Each ShWt 1, except fiddles ShWt 2 Sheave diameter: 2 3/8'' (60mm) Maximum line diameter: 9/16'' Maximum working load: 2250 lbs.
$52.4 $52.40

1-1/2" L-Head, 5.41"L from MARINE EAST
L-Head Thru-Hulls The outside flange's patented L-shaped, or cyclodial, design and the offset barb provide 300% drainage advantage over other thru-hulls when mounted vertically. Ideal for draining compartments.
$12.99

7 Series Universal Head Block, Double, Aluminum Cheeks, 12.4oz. from SCHAEFER
Universal head allows one block to function as a front shackle, side shackle, or swivel shackle block. Large sheave diameter and high working loads make them suitable for sheet and control blocks on medium to large offshore boats. Beckets are removable. 704 series are aluminum; 705 blocks are stainless. Where applicable, blocks use 1/4" fasteners. Each ShWt 1, except fiddles.
$132.98 $132.98

3/4" Threaded Marelon Mushroom Head, 2-1/4"L from FORESPAR
Marelon 251 Series Full Threaded/Mushroom Head Thru-Hull Connectors Forespar® series of the Thru-Hull Connectors are precision molded in high strength Marelon®. Their great strength, light weight and complete freedom from corrosion and electrolysis make them the ideal Thru-Hull Connectors for use above or below the waterline. All Thru-Hull Connectors must be installed with proper bedding compound. CF 2505 ½), indicates a Thru-Hull Connector that has been fitted with a strainer. Full threaded.
$13.99

2" Marelon Mushroom Head, 3"L from FORESPAR
253 Series Hose tailpipe/Mushroom Head.
$27.99