Nylon Sanitation Hose Fittings

90° Sanitation Hose Fitting, 1-1/2" FP Thread from SHIELDS RUBBER
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.
$17.99

Straight Sanitation Hose Fitting, 1-1/2" FP Thread from SHIELDS RUBBER
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.
$16.99

Tee Type Sanitation Hose Fitting, Slip Fitting Thread from SHIELDS RUBBER
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.
$17.99

Poly X Sanitation Hose, 1-1/2"ID, 1-27/32"OD from SHIELDS RUBBER
With a lifetime warranty against odor permeation, this is the best sanitation hose we offer. It combines the flexibility of rubber hose with the permeation resistance of polyurethane. It’s easy to slip on to most fittings and the polyurethane cover is very abrasion resistant. The glossy cover makes clean up easy. Material: Smooth white neoprene inner tube with two textile fabric plies, glossy black polyurethane outer cover. Reinforcement: One steel wire. Temperature Range: –22° to +195°F.
$18.69

Poly X Sanitation Hose, 1"ID, 1-21/64"OD from SHIELDS RUBBER
With a lifetime warranty against odor permeation, this is the best sanitation hose we offer. It combines the flexibility of rubber hose with the permeation resistance of polyurethane. It’s easy to slip on to most fittings and the polyurethane cover is very abrasion resistant. The glossy cover makes clean up easy. Material: Smooth white neoprene inner tube with two textile fabric plies, glossy black polyurethane outer cover. Reinforcement: One steel wire. Temperature Range: –22° to +195°F.
$15.19

Closed-Base Cleats - Chromed Zinc 4 1/2", Plastic Base from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$24.99

Open-Based Cleats - Chromed Zinc, Plastic Base 4 1/2" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$22.99

1" Outlet 1, 1" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

3/4" Outlet 1, 1-1/8" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

5/8" Outlet 1, 3/4" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

6" ID Single Hump Hose from SHIELDS RUBBER
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
$234.99