BOOTTOP PAINT, FLAG BLUE 1/2 Pint from INTERLUX
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
$14.99
|
BOOTTOP PAINT, BLACK 1/2 Pint from INTERLUX
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
$14.99
|
BOOTTOP PAINT, WHITE 1/2 Pint from INTERLUX
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
$14.99
|
Non-Skid Compound - 1/2 Pint from INTERLUX
Use to create nonskid areas on deckThis paint additive is made of very fine polymeric spheres that don’t collect dirt as easily as natural grit. Mix directly into paint and brush or roll on. Ratio is 1/2pt additive to 1qt paint and 1qt to 1gal. Recommended Usage: Turns decks into nonskid surfaces . Application: Brush, roll or broadcast . Compatibility: One and two-part polyurethane, alkyd enamel. Coverage: 1/2 pint per one quart enamel.
$18.99
|
Diver's Dream Anode 1/2" x 6 x 12, w/1/2" Slot from SEA SHIELD
ZHC Diver's Dream Anode. All zinc anodes conform to Mil-a-18001 1/2" thick. 6" wide. 12" length. 8. 5 lb. s.
$64.99
|
FXA981/HP Intersleek® 900 Accelerator 1/2 Pint from INTERLUX
Totally unlike traditional antifouling coatings, the Intersleek® system represents the latest advance in foul release technology, significantly improving upon the performance of silicone based foul release systems. Intersleek does not contain any biocide. The system consists of an epoxy primer, Intersleek 731 Tie Coat and the Intersleek 900 foul release finish coating. To find out how to qualify your vessel for an Intersleek application, search Intersleek at westmarine.
$69.99
|
5-1/2" Dome Light, White Aluminum, Clear & Red Bulbs from WEST MARINE
Quality dome lights are made for the marine environment with a finish that’s guaranteed not to tarnish for the life of your boat! We’ve upgraded our halogen interior dome lights with a clean look, rocker switches and vented housings that prevent heat build-up. They’re hard to beat for general illumination below decks. The White/Red models preserve night vision and have a double-throw bulb selection switch. 5-1/2" Dome Lights with High/Off/Low Switch: 3-7/8" dia. lens. lens.
$29.99
|
Non-Skid Compound - Quart from INTERLUX
Use to create nonskid areas on deckThis paint additive is made of very fine polymeric spheres that don’t collect dirt as easily as natural grit. Mix directly into paint and brush or roll on. Ratio is 1/2pt additive to 1qt paint and 1qt to 1gal. Recommended Usage: Turns decks into nonskid surfaces . Application: Brush, roll or broadcast . Compatibility: One and two-part polyurethane, alkyd enamel. Coverage: 1/2 pint per one quart enamel.
$34.99
|
Disposable Chip Brush - 1/2" from SEAFIT
Disposable "Chip" Brushes make clean up a cinchInexpensive, 100% natural hog bristle for epoxy, bottom paint and glue. Four pack includes one 1" brush, one 1 1/2" brush, one 2" brush and one 3" brush. All-purpose disposable, square trim, wooden handle. Economy quality can drop bristles.
$0.99
|
Multi-Measure Cup - 1/2 Pint from ENCORE PAINT
Graduated markings make mixing easyTranslucent plastic cup, graduated in ml. and oz. Suitable for mixing paint, epoxy and polyester resins.
$0.79
|
#860-8 Aluminum Etch Kit, Two 1/4 pint bottles from WEST SYSTEM
Significantly improves adhesion between aluminum and epoxy A two-part treatment for preparation of aluminum surfaces for bonding with epoxy. Our research shows adhesion to aluminum is significantly improved with this process. Also improves paint adhesion. 860-8 - Two 1/4 pint bottles (treats about 50 sq. ft. ) 860 - Two 1-pint bottles (treats about 200 sq. ft.
$16.99
|
