Stainless-Steel Midget Vent from WHITECAP INDUSTRIES
Heavy-gauge, stamped stainless steel midget vent Pre-drilled for #6 fasteners Can be used as a cable feeder 1-1/2"W x 1-3/4"L Mfr.
$4.79
|
Stainless Steel Deck Fills from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
$39.99
|
Deck Fill, Waste, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
$39.99
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
$29.99
|
Narrow Stainless-Steel Louvered Vent, 9/16" from ATTWOOD
Suitable for installation on any flat area of most contoured hulls. Constructed of all-welded 304 stainless with a polished finish. Vents for use with 3"ID ventilation systems and require a 1343 collector box. Install with #6 screws. Type: Louvered . Material: Stainless steel. Dimensions: 3"W x 16-7/8"L . Cutout Size: 2-7/16"W x 16-3/16"L .
$41.99
|
Narrow Stainless-Steel Louvered Vent, 1/16" from ATTWOOD
Suitable for installation on any flat area of most contoured hulls. Constructed of all-welded 304 stainless with a polished finish. Vents for use with 3"ID ventilation systems and require a 1343 collector box. Install with #6 screws. Type: Louvered . Material: Stainless steel. Dimensions: 3"W x 16-7/8"L . Cutout Size: 2-7/16"W x 16-3/16"L .
$42.99
|
Flush-Mount 316 Stainless Fuel Vent, 90° Vent from ATTWOOD
Corrosion-resistant 316 stainless steel flush vents feature a smooth exterior with no protruding cap to cause damage, or be damaged by hull bumps and scrapes. Caps unscrew with allen wrench for easy cleaning of filter or for pressure testing the entire system. For 5/8" ID fuel hose. Max. hull thickness 7/8".
$32.99
|
Flush-Mount 316 Stainless Fuel Vent, Straight Vent from ATTWOOD
Corrosion-resistant 316 stainless steel flush vents feature a smooth exterior with no protruding cap to cause damage, or be damaged by hull bumps and scrapes. Caps unscrew with allen wrench for easy cleaning of filter or for pressure testing the entire system. For 5/8" ID fuel hose. Max. hull thickness 7/8".
$34.99
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
$2.99
|
18" Stainless Steel Flag Pole from TAYLOR
Stainless steel flagstaffs always look grand Quality stainless-steel flag poles clamp or socket mount to fly your colors. Lengths from 18" to 48. " An excellent non-corroding staff for displaying ensigns, courtesy flags and more.
$87.99
|
304 Stainless-Steel Hose Clamp, 5-7/8" to 6-11/16", SAE Size 99 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$2.19
|
