Marine Rubber Hump Hoses

5In Rubbr Single Hump W/Clamps from SHIELDS RUBBER
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
$67.99

4In Rubbr Single Hump W/Clamps from SHIELDS RUBBER
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
$62.99

6In Rubbr Single Hump W/Clamps from SHIELDS RUBBER
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
$72.99

6" ID Single Hump Hose from SHIELDS RUBBER
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
$234.99

5" ID Single Hump Hose from SHIELDS RUBBER
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
$174.99

4" ID Single Hump Hose from SHIELDS RUBBER
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
$142.99

8" ID Single Hump Hose from SHIELDS RUBBER
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
$334.99

T-Bolt Exhaust Clamp - Dia. Range: 10.45"-11.11"; Hose ID 10" from SHIELDS RUBBER
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
$21.99

T-Bolt Exhaust Clamp - Dia. Range: 2.31"-2.69"; Hose ID 2" from SHIELDS RUBBER
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
$12.99

T-Bolt Exhaust Clamp - Dia. Range: 8.42"-9.08"; Hose ID 8" from SHIELDS RUBBER
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
$18.99

T-Bolt Exhaust Clamp - Dia. Range: 1.64"-2.02"; Hose ID 1 1/2" (5/8"W Band) from SHIELDS RUBBER
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
$11.99