Splash Zone Epoxy

Splash Zone Epoxy, #788 2QT KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.
$109.99

Epoxy Kit-Rapid Cure, Mini from MAS EPOXY
Mas's ONLY 1:1 ratio epoxy adhesive -- This stuff is FAST!! It's great for quick repairs and bonding. Mix small amounts - no more than 1/2 oz. of each of the resin and hardener at a time. You'll have 1-2 minutes to use it, and 5-10 minutes to set it. You can sand in 1 hour, and full cure is in 4-6 hours. Be Careful - this is FAST, PERMANENT, and WATERPROOF. The MINI, 8 oz. kits are great for keeping on board or at home in the tool kit. Useful for quick kayak and canoe - or home - repairs.
$33.99

Epoxy Kit-Rapid Cure, Pint from MAS EPOXY
Mas's ONLY 1:1 ratio epoxy adhesive -- This stuff is FAST!! It's great for quick repairs and bonding. Mix small amounts - no more than 1/2 oz. of each of the resin and hardener at a time. You'll have 1-2 minutes to use it, and 5-10 minutes to set it. You can sand in 1 hour, and full cure is in 4-6 hours. Be Careful - this is FAST, PERMANENT, and WATERPROOF. The MINI, 8 oz. kits are great for keeping on board or at home in the tool kit. Useful for quick kayak and canoe - or home - repairs.
$43.99

VC-Perfomance Epoxy, 2 Quart Kit from INTERLUX
Teflon® adds lubricity and eases wet sanding and burnishing. VC Performance Epoxy's hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water not requiring antifouling protection. VC Performance Epoxy has no antifouling or foul release properties. Recommended Usage: Dry-stored or trailerable boats; gel coat, epoxy, or metal hulls; racing boats . Additives: Teflon® . Number of Coats Recommended: Three/four, as needed . Coverage: 50sq.
$69.99

VC-Underwater Epoxy Bottom Finish - 2 Gallons from INTERLUX
Teflon® adds lubricity and eases wet sanding and burnishing. VC Performance Epoxy's hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water not requiring antifouling protection. VC Performance Epoxy has no antifouling or foul release properties. Recommended Usage: Dry-stored or trailerable boats; gel coat, epoxy, or metal hulls; racing boats . Additives: Teflon® . Number of Coats Recommended: Three/four, as needed . Coverage: 50sq.
$199.99

InterProtect Watertite Epoxy - 500ml (17oz.) from INTERLUX
Versitile compound excellent for glazing and blister repairA fast-cure, two-part epoxy compound that is also excellent for blister repair. Can be applied up to 3/4" thick without sagging. As a glazing compound, it can be spread to a smooth, thin layer. Formulation: Fast cure two-part epoxy filler Recommended Usage: Gelcoat repair, osmotic blister repair Drying: To touch - 10 to 70 min. ; Sandable - 3 to 24 hrs. ; Immersion - 2 days Color: Light Blue Quantity: 500ml (17oz. ); 1000ML (34oz.
$38.99

U-1289 Epoxy Reducer, Gallon from STERLING
For use with all epoxy-based primers.
$89.99

Epiglass Epoxy Resin, Pump (for Gallon) from INTERLUX
A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60°F. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) . Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. @ 50°F; 14min.
$37.99

404/414 Epoxy Primer - Quart Kit from INTERLUX
Versitile primer for all topside finishesMultipurpose, two-part epoxy primer for use above or below the waterline. Good enamel holdout, sands freely but does not sand through easily, and provides an excellent base for all topside finishes. Resurfaces cracked gel coat prior to application of enamel. Recommended Usage: Above water, primer for Perfection two-part, sanding surfacer for cracked/crazed gelcoat. Formulation: Multi-purpose two-part epoxy primer. Coverage: Brush: 112sq. ft/qt, 450sq.
$43.99

Git Rot Penetrating Epoxy - 16 OZ from BOAT LIFE
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.
$44.99

Epoxy Pigment - White, 6 OZ from WEST SYSTEM
WEST SYSTEM pigments are epoxy-based liquid colorants used to tint the epoxy mixture to provide an even color base for the final finish system. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional opaque or UV filter coating for ultraviolet protection. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. 501 White Pigment - One 4 oz. - One 4 oz.
$15.99