Ready Cleat

5"L Flat Head Cleat, 1-5/16"H, Requires Two #10 FHMS Fasteners from SEADOG
Beefy cleats for docks or work boats. Galvanized steel for corrosion resistance.
$3.99

Closed-Base Cleats - Bronze 3" from WEST MARINE
We recommend stainless or bronze cleats for use in fresh or salt water. Zinc and Zamak cleats should be used in fresh water only. We stock a complete selection of cleats for anchoring, docking and general-purpose use.
$6.99

Gripper Cleat - 3" Nylon from STEARNS
Secure items onboard without tying a knot or cleating a line. Weave the line back and forth on opposite sides of each post, and friction holds it in place under tension. When tension is eased, the line releases as easily as it was cleated. Zinc recommended for fresh water use only. 3" fits ropes up to 3/8" 4" fits ropes up to 1/2". Available in plain or chromed zinc.
$12.99

Light-Duty Cleats - Bronze 2 1/2" from WEST MARINE
We stock a complete selection of cleats for anchoring, docking and general-purpose use. We recommend stainless or bronze cleats for use in fresh or salt water. Light-duty cleats are for holding light loads like flag halyards and fender lines. Fasteners not included.
$2.49

4" Jam Cleat Open-Base Cleat, 5/16" Max. Line Dia., two #10 FHMS, 5/8"H from SCHAEFER
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
$37.99

6" Jam Cleat Open-Base Cleat, 1/2" Max. Line Dia., two 1/4" FHMS, 1"H from SCHAEFER
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
$59.99

6" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
$67.99

Midrail Cleat 1'X 1/8" from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1 1/4'' T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless. Strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
$99.99

8" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
$33.99

Yellow Medium C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
$21.84 $21.84

Open-Based Cleats - Bronze 6" from WEST MARINE
We recommend stainless or bronze cleats for use in fresh or salt water. Zinc and Zamak cleats should be used in fresh water only. We stock a complete selection of cleats for anchoring, docking and general-purpose use.
$24.99