3 and 4 Blade Prop Removal Kit or Tool

Prop Removal Kit from NATIONAL PRODUCTS
PRO-PULL Kits let you quickly remove 3- and 4-blade propellers from inboard shafts with a 3/4'' to 1 1/8'' diameter. The tool is made of heat-treated steel and features fine-thread screws for tremendous pulling force with very little effort. Kit also includes: Prop nut wrench, stainless cotter pin, brass prop-shaft key. Brass nylock prop nut, waterproof grease, and a rustproof carrying case.
$99.99

Prop Nut Tool, OB & I/O from NATIONAL PRODUCTS
Six solid-bronze tools in one, to help you to remove and install propeller nuts, cotter pins and prop nut keepers. Works on most larger outboards including Mercury/Mariner 75hp and up, Suzuki and Yamaha 55hp and up, and OMC 60hp and up. Fits most stern drives with 1 1/16'' or 1 1/4'' prop nuts.
$36.99

RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
$297.5 $297.50

Prop Puller for Shafts 1" to 1-1/2", 3/4" Min Clearance from NATIONAL PRODUCTS
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.
$214.99

Prop Puller for Shafts 1-5/8" to 2", 13/16" Min Clearance from NATIONAL PRODUCTS
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.
$239.99

Caulk-Away - Caulk Removal Tool from STARBRITE
Caulk like a pro with these handy tools Two tools do the job with no marks or chemicals. Caulk-Away lifts out old caulk. Caulk-Rite helps create a professional-looking, smooth, new bead every time! Non-scratching design of Caulk-Away and Caulk-Rite tools won't mar gelcoat.
$8.99

Caulk-Rite - Caulk Smoothing Tool from STARBRITE
Caulk like a pro with these handy tools Two tools do the job with no marks or chemicals. Caulk-Away lifts out old caulk. Caulk-Rite helps create a professional-looking, smooth, new bead every time! Non-scratching design of Caulk-Away and Caulk-Rite tools won't mar gelcoat.
$8.99

Impeller Puller, Large from JABSCO
Impeller Puller Tools Simply tighten the tool’s grip fingers into the rubber hub of the impeller and turn the extraction screw clockwise to pull the impeller out of the pump.
$99.99

Swage Tool For Small Diam Wire from SEAFIT
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.
$25.99

Impeller Puller, Small from JABSCO
Impeller Puller Tools Simply tighten the tool’s grip fingers into the rubber hub of the impeller and turn the extraction screw clockwise to pull the impeller out of the pump.
$74.99

Swage Tool For Large Diam Wire from SEAFIT
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.
$54.99