Spinnaker Pole Slides

1 3/8 inch PROP SHAFT KIT from S And J PRODUCTS
PROP SHAFT KIT 1 3/8.
$24.99 $4.44

Square Flush Ring Pull - Chromed Zinc 1 3/4" x 1 3/8" from PERKO
Highly polished chrome plated zinc alloy. Recessed center. . Dimensions: 1 3/4" x 1 3/8" . Requires four #6 fasteners .
$19.49

Fits Panel Up to 1-3/8", Off-Run-Start Ignition Switch from COLE HERSEE
7/8" dia. hole and includes PVC boot for added weather protection. Each switch includes two keys and different key codes for added security. Nickel-silver screw terminals provide superior conductivity. 15A ignition, 20A start, 6-36V DC. M-832 is Off-Run-Start with Push-To-Choke (6 terminals) and fits panels up to 1 3/8".
$38.99

Black Anodized Track, 1" x 8', 1/4" FH Fasteners from SCHAEFER
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
$142.99

Pole Slide, 1-1/4" T-Track Size, 1-3/4" Ring ID from RONSTAN
All slides are made of stainless steel with spring pin stops.
$62.99

Pole Slide, 1" T-Track Size, 1-1/4" Ring ID from RONSTAN
All slides are made of stainless steel with spring pin stops.
$49.99

Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
$184.54

Series 60 Orbit Block, Single, 2-3/8" Sheave Size, 4,410lb. SWL, 9.2oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
$300.04

Fuel line, Universal fit end, 3/8" I.D. from MOELLER
3/8" I. D. Universal fit end. Replaces OEM No.
$19.99 $19.99

Terminal Fuse Block, 3/8" Mounting Hole, 1 Terminal Stud from BLUE SEA SYSTEMS
New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse—Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraints Weatherproof—suitable for small open-cockpit boats and other harsh environments Insulating cap prevents accidental shorts Use 5/16" or 3/8" ring terminal.
$19.99

Terminal Fuse Block, 3/8" Mounting Hole, 2 Terminal Studs from BLUE SEA SYSTEMS
New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse—Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraints Weatherproof—suitable for small open-cockpit boats and other harsh environments Insulating cap prevents accidental shorts Use 5/16" or 3/8" ring terminal.
$31.99