1-800-685-4838

Shopping Cart | My Account | Customer Service

Catalog Request | West Advantage Program | Store Locator

Welcome! Please Sign-In

Home

> Home > Paint & Maintenance > Paint, Varnish & Teak Oil > Primers, Undercoats & Non-Skid > No-Sand Primer


	No-Sand Primer

INTERLUX

No-Sand Primer

Product Rating: Not reviewed
Submit a Review of No-Sand Primer
Read Reviews of No-Sand Primer

Availability:	In Stock
WM Model #: 3821485
Manuf. Part #: YPA200/QT

	No Hassle Guarantee
	Shipping Information
	View No-Sand Primer in the Annual Catalog

Overview of No-Sand Primer.

Speeds up the prepping process prior to application of antifouling paint

Eliminates the need to sand fiberglass boats before painting by creating a chemical bond between the fiberglass surface and the first coat of antifouling paint. Quart.

Primary Usage: Underwater, bare fiberglass, as tie-coat for bottom paint
Formulation: Underwater fiberglass primer for bottom paint
Applies Over: De-waxed bare fiberglass
Drying Time: To touch/overcoating: 30 min. to 2 hrs.
Number of Coats Recommended: One coat, applied in one direction only. Brush/roller only. Do not spray
Thinner: Cleanup solvent: 2316N, Model 198598 Coverage: 133sq.ft./qt.
Color: Aluminum Gray

This item is a shipping hazard. Additional hazard shipping costs may apply. The hazard charge (if any) will appear during checkout when you verify the ship-to address. Hazardous items cannot ship outside the US.

INTERLUX
Fiberglass Surface Prep
Only $26.99 USD
Add to Project List

3M PRODUCTS
Scotch Blue Multi-Surface 2090 Blue Long Masking Tape - 1"
Only $5.49 USD
Add to Project List

GREAT AMERICAN MARKE
Nitrile Gloves - 10 Pack
Only $4.99 USD
Add to Project List

Products related to No-Sand Primer

Skip Sand Primer, Qt from PETTIT
Recommended for use over vinylester and other blister-resistant gelcoats where sanding is forbidden, this primer eliminates the need to sand prior to application of antifouling paint. It may also be used over conventional gelcoats and as a tie-coat between two-part epoxy primers and antifouling paints. Quart. Color: Green/Silver. Drying time: To touch: 1hr. @ 70°F. ; to overcoat: 2hrs.
$33.99

InterProtect® 2000 VOC from INTERLUX
Interprotect® 2000VOC is a unique two part epoxy coating developed to protect new and used fiberglass hulls from water absorption which can lead to poor hull performance and osmotic blistering. Interprotect® 2000VOC has Micro-plates® which create an overlapping barrier to eliminate any direct path for water migration. Interprotect® 2000VOC is also used as a no-sand primer when painting new boats.
$99.99

Trilux Prop & Drive Antifouling Paint, Primer from INTERLUX
For aluminum outdrives, outboards and hulls Trilux® Prop & Drive has been specially formulated with Biolux™ to be the safest & most effective product for use on aluminum outdrives & outboards. When applied over properly primed aluminum Trilux® Prop & Drive with Biolux™ will provide good antifouling protection. One can covers approximately 22sq. ft. (one lower unit). Recommended Usage: Fresh, salt, brackish water; trailerable, dry-stored boats; aluminum lower units- outdrives .
$26.99

Bio-Blue 92 Hull Surface Prep, Qt. from PETTIT
Bio-Blue Hull Surface Prep 92 is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting. Regardless of the boat’s age, the initial surface preparation is imperative. This solvent-free product is designed to provide an easy and trouble-free method of removing unwanted contaminants, grease, wax, dirt, and mold release agents from fiberglass surfaces prior to painting. Easy to use formula . Biodegradable with no VOC content .
$17.99

Bio-Blue 92 Hull Surface Prep, Gal from PETTIT
Bio-Blue Hull Surface Prep 92 is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting. Regardless of the boat’s age, the initial surface preparation is imperative. This solvent-free product is designed to provide an easy and trouble-free method of removing unwanted contaminants, grease, wax, dirt, and mold release agents from fiberglass surfaces prior to painting. Easy to use formula . Biodegradable with no VOC content .
$62.99

Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
$35.99

Brightside Pre-Kote, White, Gallon from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
$99.99

Brightside Pre-Kote, White, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
$34.99

30-Y-94 Epoxy Primer - Base, Quart, (Professional Application Only) from AWLGRIP
Anticorrosive for aluminum. Needs no sanding. Spray only. Coverage: 300 sq. ft. /gal.
$62.99

30-Y-94 Epoxy Primer - Converter, Quart, (Professional Application Only) from AWLGRIP
Anticorrosive for aluminum. Needs no sanding. Spray only. Coverage: 300 sq. ft. /gal.
$39.99

30-Y-94 Epoxy Primer - Base, Gallon, (Professional Application Only) from AWLGRIP
Anticorrosive for aluminum. Needs no sanding. Spray only. Coverage: 300 sq. ft. /gal.
$184.99

Hullgard Primer Converter, Qt. from AWLGRIP

AWLGRIP
Hullgard Primer Converter, Qt. from AWLGRIP
Only $35.99 USD
Add to Project List

Chris Craft Stain #573 - Pint from INTERLUX

INTERLUX
Chris Craft Stain #573 - Pint from INTERLUX
Only $22.99 USD
Add to Project List

Primer Bulb, 1/4" Hose Barb from MOELLER

MOELLER
Primer Bulb, 1/4" Hose Barb from MOELLER
Only $13.99 USD
Add to Project List


Company History Mission Statement Press Room Careers at West Marine Affiliate Program Annual Catalog Store Locator And More...	Stock Price Press Releases SEC Filings Email Alerts Analyst Coverage Management Team Financial FAQ And More...	Terms Of Use Returns/Exchanges Privacy Policy Contact Us Site Map Annual Catalog Product Recalls And More...

No-Sand Primer

View products by:

Title | Category | Manufacturer | Part No | Price

View categories by:

Title | Manufacturer | Price