|
|
Rain Drain Opening Ports - 4"W x 14"L from BECKSON MARINE INC
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
$149.99
|
Rain Drain Opening Ports - 7"W x 14"L from BECKSON MARINE INC
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
$149.99
|
7"W x 14"L Port, 9-3/4" x 16-3/4" Flange Diameter from BECKSON MARINE INC
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
$149.99
|
5"W x 12"L Port, 7-3/4" x 14-5/8" Flange Diameter from BECKSON MARINE INC
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
$144.99
|
4"W x 14"L Port, 6-3/4" x 16-3/4" Flange Diameter from BECKSON MARINE INC
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
$144.99
|
Rain Drain Opening Ports - 5"W x 12"L from BECKSON MARINE INC
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
$149.99
|
Vent-O-Mate, White from BECKSON MARINE INC
Keep rain out and let air circulate through the cabin with the Vent-O-Mate. Wind moving over the top of the vent creates a vacuum which removes air from your boat at the rate of 350cu. ft. /hr. in a 5-knot breeze. The design keeps rain out, even while open. Cutout: 4". Includes 8" protective white cover. Type: Passive vent . Material: Plastic, stainless . Draw: Non-powered .
$28.99
|
8" Nonskid Dimpled Pry-Out Deck Plate, 10" Flange, 8-3/8" Cutout, White from BECKSON MARINE INC
Designed with an extra-heavy O-ring for a watertight fit, these pry-out plates have nonskid surfaces for horizontal installations and smooth surfaces for vertical installations. The diamond pattern deck plates have a nonskid surface that extends across the center, eliminating the edge ring that traps dirt and debris. The clear center plate permits observation of controls or gauges without the need to remove the plate. Clear plate models include white flange rings. Material: ABS plastic .
$25.99
|
Teak Interior Trim Ring - 4" from NICRO VENTILATION
While plastic rings are the most basic way to trim out a vent installation hole, adding a teak ring over the plastic one gives a more "finished" look belowdecks. In addition, they include a fine nylon mesh screen which keeps critters out.
$22.99 $19.88
|
Vent-O-Mate Plastic Cover Only, White from BECKSON MARINE INC
Keep rain out and let air circulate through the cabin with the Vent-O-Mate. Wind moving over the top of the vent creates a vacuum which removes air from your boat at the rate of 350cu. ft. /hr. in a 5-knot breeze. The design keeps rain out, even while open. Cutout: 4". Includes 8" protective white cover. Type: Passive vent . Material: Plastic, stainless . Draw: Non-powered .
$16.49
|
