3300 Cable System Parts

N. 1-3/4"L x 5/16"W Eye Strap, 1/2" Fairlead Width, 1-5/16" Hole Centers, Two #10 RHMS Fasteners from SCHAEFER
1-3/4"L x 5/16"W Eye Strap, 1/2" Fairlead Width, 1-5/16" Hole Centers, Two #10 RHMS Fasteners.
$5.29

Eye Jaw Toggle, 1-5/16" Interior Depth, 5/16" Pin Diameter from SCHAEFER
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
$19.99

Eye, 5/32IN Wire 5/16IN Pin from NAVTEC
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
$37.99

Double Jaw Toggle, 1-1/4" Interior Depth, 5/16" Pin Diameter from SCHAEFER
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
$34.99

5/16" Wire, 1/2" Pin from NAVTEC
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
$74.99

3/8" Wire, 5/8" Pin from NAVTEC
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
$99.99

Jaw & Swage, 5/32" Wire, 5/16-24 Thread, 5/16" Pin Dia., 4000lb. Tens. Strength, 3-3/4" Adj. L from JOHNSON, C.S.
Series 03 and 04 include LH upper terminals (unless designated RH).
$66.65 $44.99

Yamaha 5/16" Barb Female Fuel Line Engine Connector from MOELLER
Yamaha 5/16" Barb Female Fuel Line Engine Connector.
$7.29 $7.29

Fuel Line Engine Connector, OMC, 5/16" Barb from MOELLER
Bombardier (Johnson/ Evinrude) 5/16" Barb Female Fuel Line Engine Connector.
$7.29 $7.29

1/4" NPT Brass Hose Barb, 5/16" Female Thread from MOELLER
Barb-Fuel 1/4Npt x 5/16 Fm Thr|Barb-Fuel 1/4Npt x 5/16 Fm Thr.
$6.29 $6.29

Mercury 5/16" Barb Female Connector, Plastic from MOELLER
Mercury female bayonet style connector with 5/16" hose barb attaches to the fuel hose on the engine side.
$8.49 $8.49