Split Backstay Adjuster

Split Backstay Adjuster, 1/4" Max. Wire Dia., Sheave Only Downhaul Fitting from C SHERMAN JOHNSON
This adjusting car replaces separate blocks and a connecting member. Tandem sheaves eliminate severe flexing of the backstay, providing a neat, thoroughly functional fitting. The 38 Series with Delrin sheaves is intended for boats under 30ft. , while the husky 39 Series with aluminum sheaves is intended for boats up to 40 feet. 5 to 1 ratio between backstay base width and car height. Example: If backstay width is 5', car height should not exceed 7-1/2' to 8' in height off deck.
$32.99

Split Backstay Adjuster, 1/4" Max. Wire Dia., Sheave & Becket Downhaul Fitting from C SHERMAN JOHNSON
This adjusting car replaces separate blocks and a connecting member. Tandem sheaves eliminate severe flexing of the backstay, providing a neat, thoroughly functional fitting. The 38 Series with Delrin sheaves is intended for boats under 30ft. , while the husky 39 Series with aluminum sheaves is intended for boats up to 40 feet. 5 to 1 ratio between backstay base width and car height. Example: If backstay width is 5', car height should not exceed 7-1/2' to 8' in height off deck.
$87.99

Split Backstay Adjuster, 3/16" Max. Wire Dia., 4 Delrin Sheaves from C SHERMAN JOHNSON
This adjusting car replaces separate blocks and a connecting member. Tandem sheaves eliminate severe flexing of the backstay, providing a neat, thoroughly functional fitting. The 38 Series with Delrin sheaves is intended for boats under 30ft. , while the husky 39 Series with aluminum sheaves is intended for boats up to 40 feet. 5 to 1 ratio between backstay base width and car height. Example: If backstay width is 5', car height should not exceed 7-1/2' to 8' in height off deck.
$9.49

Backstay Adjuster, 13-3/4" Closed, 20-1/2" Open from WICHARD
These stay adjusters are easy to adjust using a large-diameter, hand-turned wheel. Constructed of stainless steel with a synthetic wheel. Affords about 6-3/4" of travel. Backstay adjuster features a 1/2" pin dia. Toggle jaw at each end. The babystay adjuster features a rugged pelican hook at the bottom for easy attachment, and a D shackle at the top. Safe Working Load: 7,700lb. functional load limit.
$449.99

Backstay Adjuster, 1/2" Piston Size, 5400 Max. Force at Std. Relief Valve Setting, 9/32" Max. 1x19 Wire Size, 1/2" Pin dia, 44.3" Length Open, 30.8" Length Closed, 13.5" Stroke from NAVTEC
Self-contained hydraulic adjusters feature a longer pump handle that produces a faster pumping motion and more tension per stroke to accommodate modern masts. A built-in gauge is located where it’s easy to read tension values in psi. Includes a single-action pump and leak-free extruded aluminum housing. Overload relief valve saves the rig from overzealous crew. Easy to install, since a remote pump and hose are not required.
$1519.00

Backstay Adjuster, 5/8" Piston Size, 8700 Max. Force at Std. Relief Valve Setting, 3/8" Max. 1x19 Wire Size, 5/8" Pin dia., 47.7" Length Open, 33.5" Length Closed, 14.2" Stroke from NAVTEC
Self-contained hydraulic adjusters feature a longer pump handle that produces a faster pumping motion and more tension per stroke to accommodate modern masts. A built-in gauge is located where it’s easy to read tension values in psi. Includes a single-action pump and leak-free extruded aluminum housing. Overload relief valve saves the rig from overzealous crew. Easy to install, since a remote pump and hose are not required.
$2199.00

Stay Adjuster, 1/8" Wire Dia., 1/4" Pin Dia., 2-1/8" Adj. Range, 3000lb. Breaking Strength from JOHNSON, C.S.
Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other.
$35.99

Long Lifeline Adjuster, Machine Swage, 2" Adjust Range, 10-32RH Thread Size from JOHNSON, C.S.
Extra-long for wider range of adjustment. Knurled adjustment knob with lock nut.
$25.99

Spare Long Lifeline Adjuster, Stud Only, 10-32 x 3" Thread Size from JOHNSON, C.S.
Extra-long for wider range of adjustment. Knurled adjustment knob with lock nut.
$17.99

Stay Adjuster Replacement Stud, 3/32" Wire, 10-32 (3"L) Stud from JOHNSON, C.S.
Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other.
$19.99

Backstay Turnbuckle, 5/16" Max. Wire Dia., 1/2" Pin Dia., 10,500lb. Breaking Strength from JOHNSON, C.S.
Feature dual handles for quick adjustment. Upper handle locks the turnbuckle when closed. Length closed: 15". Length open: 21". Thread size: 5/8-18. Bronze rods eliminate any tendency for galling with the stainless steel body.
$409.99