Stainless-Steel Triangular Loops

Stainless-Steel “D” Ring, 1/4" Wire Dia., 2" Inside Width from WEST MARINE
Polished, heliarc-welded, stainless-steel rings.
$12.99

Stainless-Steel “D” Ring, 1/4" Wire Dia., 1-1/2" Inside Width from WEST MARINE
Polished, heliarc-welded, stainless-steel rings.
$12.49

Stainless-Steel Triangle Loop, 3/16" Wire Dia., 1" Inside Width from SEAFIT
For backstay adjusters or other applications where you need to connect three blocks together. Can also be used to terminate webbing assemblies. Heliarc welded.
$11.99

Stainless-Steel “D” Ring, 3/16" Wire Dia., 1" Inside Width from WEST MARINE
Polished heliarc welded stainless steel rings. ShWt .
$11.49

Stainless-Steel Rectangle Loop, 3/16" Wire Dia., 1/2" x 2" Inside Dim. from SEAFIT
Use with eyestraps to attach webbing to surfaces, or sew to fabric as a webbing pass-thru. Heliarc welded.
$8.99

Stainless-Steel Rectangle Loop, 3/16" Wire Dia., 1/2" x 1" Inside Dim. from SEAFIT
Use with eyestraps to attach webbing to surfaces, or sew to fabric as a webbing pass-thru. Heliarc welded.
$7.99

Stainless-Steel “S” Hook, 1/8" Wire Dia., 3/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
$2.99

304 Stainless-Steel Hose Clamp, 1-5/8" to 2-3/8", SAE Size 30 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.69

304 Stainless-Steel Hose Clamp, 1-3/8" to 2", SAE Size 24 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.59

6" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
$67.99

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
$55.99