1'' Transom Drain W/Plug

Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
$8.49

Drain W/Plug, 1'' Chrome from RONSTAN
This chrome-plated drain uses a nylon plug with a rubber gasket. Mounts in a 1" hole, and uses #10 FH fasteners. Fasteners not included.
$9.79

5 Spare Plugs With ''o'' Rings from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
$8.99

Plug, Replacement For RF294 from RONSTAN
This chrome-plated drain uses a nylon plug with a rubber gasket. Mounts in a 1" hole, and uses #10 FH fasteners. Fasteners not included.
$6.29

Rain Drain Opening Ports - 7"W x 14"L from BECKSON MARINE INC
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
$149.99

7"W x 14"L Port, 9-3/4" x 16-3/4" Flange Diameter from BECKSON MARINE INC
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
$149.99

Rain Drain Opening Ports - 4"W x 14"L from BECKSON MARINE INC
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
$149.99

5"W x 12"L Port, 7-3/4" x 14-5/8" Flange Diameter from BECKSON MARINE INC
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
$144.99

4"W x 14"L Port, 6-3/4" x 16-3/4" Flange Diameter from BECKSON MARINE INC
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
$144.99

Rain Drain Opening Ports - 5"W x 12"L from BECKSON MARINE INC
Primarily for installations where cabin sides are inclined at angles greater than 15° from vertical and ports collect rain and spray. These ports have 2" spigots. When trimmed flush and installed in hulls up to 5/8" thick, they drain even when tipped at angles up to 45°. Constructed of strong, white ABS plastic with clear Lexan windows. Use only 100% silicone caulk for installation. Drain even when tipped at angles up to 45°. Constructed of strong ABS plastic. Clear Lexan window.
$149.99

1-1/4'' Drain Plug, T-Handle - Stainless Steel from SEAFIT DRAIN
Standard rubber and brass plug fits 1" transom drains on many production boats. Also available in stainless steel.
$7.99