110V AC Automatic Bilge Pump

Rule-Mate 500, 12V, 1.9A Draw, 3/4" Port, 4.5"H x 6"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.
$59.99 $49.99

Rule-Mate 750, 12V, 2.7A Draw, 3/4" Port, 4.5"H x 6"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.
$79.99 $69.99

Rule-Mate 1100, 12V, 3.4A Draw, 1-1/8" Port, 4.5"H x 5"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.
$94.99 $84.99

2000gph Rule-Mate, 24V, 4.2A Draw, 1-1/8" Port, 6"H x 7-1/4"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
$209.99 $209.99

2000gph Rule-Mate, 12V, 8.4A Draw, 1-1/8" Port, 6"H x 7-1/4"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
$209.99 $209.99

1500gph Rule-Mate, 12V, 4.8A Draw, 1-1/8" Port, 6"H x 7-1/4"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
$164.99 $164.99

500gph Rule-Mate, 12V, 1.0A Draw, 3/4" Port, 4"H x 5"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
$52.99

Rule 2000 Bilge Pump from RULE INDUSTRIES
Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28. 6mm) discharge outlet. Voltage: 12 Volts. Flow Rate: 2000 gph 7571 lph . Port Type: 1-1/8" (28mm) Hose barb . Amp Draw: 8. 4 amp . Fuse Size: 15 amp . Height: 7-3/4 inches 196.
$162.99

1100gph Automatic Bilge Pump, 3.4A @ 12V DC Draw, 1-1/8" Port from ATTWOOD
Engineered for extended service life, these pumps feature a cool-running design and quality components including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Type: Automatic centrifugal submersible . Features: Superior motor cooling. Test knob for operational check without disassembly. . Built-In Switch: Non-mercury mechanical float switch . Material: Glass-filled polyester impeller, 316 stainless shaft . 4"H x 3-1/4"W x 5-1/2" L.
$89.99

500gph Automatic Bilge Pump, 1.2A @ 12V DC Draw, 3/4" Port from ATTWOOD
Engineered for extended service life, these pumps feature a cool-running design and quality components including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Type: Automatic centrifugal submersible . Features: Superior motor cooling. Test knob for operational check without disassembly. . Built-In Switch: Non-mercury mechanical float switch . Material: Glass-filled polyester impeller, 316 stainless shaft . 4"H x 3-1/4"W x 5-1/2" L.
$49.99

110V AC Flexible Impeller Pump, 26 gpm. from JABSCO
110V AC Flexible Impeller Pump Similar to Water Puppy DC pumps, but for use with shore power or AC power from your genset. Self-priming and portable. Accepts optional vacuum switch to shut off the pump automatically if unattended preventing dry running. Removable end cover enables easy impeller service Includes neoprene impeller and grounded power cord Not ignition protected—do not use when flammable vapors are present 26 Gpm 1" NPT Weight 35.
$699.00