257 White Surfacing Putty - Pint

Marine Surfacing Putty - Quart from EVERCOAT
Versitile putty repairs scrapes, gouges, dings and dentsQuick, easy, permanent fiberglass, wood or metal repair. May be mixed with coloring agent. Formulation: Polyester putty Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals Color: White, may be mixed with coloring agent to tint to desired shade. Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals.
$33.99

Marine Surfacing Putty - Gallon from EVERCOAT
Versitile putty repairs scrapes, gouges, dings and dentsQuick, easy, permanent fiberglass, wood or metal repair. May be mixed with coloring agent. Formulation: Polyester putty Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals Color: White, may be mixed with coloring agent to tint to desired shade. Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals.
$72.99

Polyester Glazing Putty - Quart from EVERCOAT
Ultra-smooth surfacing putty can be applied over roughly sanded fiberglass, metal or filler surfaces.
$39.99

BOOTTOP PAINT, WHITE 1/2 Pint from INTERLUX
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
$14.99

Fiberglass Surface Prep - Gallon from INTERLUX
Specifically formulated for removing mold release and wax Fiberglass-Surface Prep is your first step in removing mold release agents and wax. It thoroughly cleans your gel coat and prepares the surface for sanding and painting.
$84.99

Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
$22.99

1 Quart Kit, White, For Canadian Use from INTERLUX
Universal above- and below-the-waterline epoxy primerA high build universal above and below waterline epoxy primer for all surfaces. Fills severe cracks and crazing in gelcoat. Adheres well to properly sanded bare metal. Offered in gray, or white, which is excellent as a topside primer. Total Thickness Required: Above waterline: 2 coats; below waterline: 4-5 coats (10 mil minimum) . Drying Time: Overcoating: 3 hrs. to 2 wks @ 60°-80°F. . Coverage: Brush: 60sq. ft/qt. , 240sq.
$34.99

Non-Skid Compound - 1/2 Pint from INTERLUX
Use to create nonskid areas on deckThis paint additive is made of very fine polymeric spheres that don’t collect dirt as easily as natural grit. Mix directly into paint and brush or roll on. Ratio is 1/2pt additive to 1qt paint and 1qt to 1gal. Recommended Usage: Turns decks into nonskid surfaces . Application: Brush, roll or broadcast . Compatibility: One and two-part polyurethane, alkyd enamel. Coverage: 1/2 pint per one quart enamel.
$18.99

Surfacing Resin - Pint from EVERCOAT
For the final coat—cures tack-freeFinal-coat polyester resin cures tack-free, regardless of exposure to air or previous resin coats. May be used over soft wood, fiberglass and metal. If more than one coat of this resin is applied, sanding is required between coats. Catalyst included. Formulation: Polyester surfacing resin. Recommended Usage: Final coat resin; cures when exposed to air . Cure Time: 4 hrs Recoat Time: 30 minutes.
$21.99

BOOTTOP PAINT, BLACK 1/2 Pint from INTERLUX
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
$14.99

BOOTTOP PAINT, FLAG BLUE 1/2 Pint from INTERLUX
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.
$14.99