Pumpguard In-Line Strainer, 5/8" Hose from JABSCO
Handy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump.
$28.99
|
Pumpguard In-Line Strainer, 3/4" Hose from JABSCO
Handy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump.
$27.99
|
1" Outlet 1, 1" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99
|
3/4" Outlet 1, 1-1/8" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$23.99
|
5/8" Outlet 1, 3/4" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$23.99
|
|
|
Closed-Base Cleats - Chromed Zinc 4 1/2", Plastic Base from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$24.99
|
Open-Based Cleats - Chromed Zinc, Plastic Base 4 1/2" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$22.99
|
Open-Based Cleats - Chromed Zinc, Plastic Base 6" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$19.99
|
Series 60 Block, Single (aluminum sheave for wire to 3/16" and rope to 1/2"), 2,320 SWL (lb.), 10.0oz. from RONSTAN
Black cheeks are made from chromed stainless steel for good looks and strength. Flared line entry reduces chafe and allows line to run freely. Universal swivel head lets you select alignment of block. Stainless steel cheeks and load straps, Acetal sheaves. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 2-2/3" (60mm). Line Diameter: 1/2" max. . Cheek Material/Finish: Stainless, polished and black chromed. Shackle/Strap Type: Universal head shackle.
$93.45 $93.45
|
Deck Fill, Waste, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
$39.99
|
