Products related to Series E Complete - 1" thread x 1 3/8" shaft x 2 1/2" dia.
Series E Anode only - 1" thread x 1 3/8" shaft x 2 1/2" dia. from CANADA METALS
The Martyr two-part prop-nut anode provides reliable corrosion protection for your valuable outdrive, outboards and propellers. Complete sets include the bronze fastener. Secured with a locking pin and special nylon patch hex fastener. Streamlined prop-nut anode is easy to install.
$21.99
|
Aluminum,1 1/4" x 1 3/8" dia. x 2 1/2"L from CANADA METALS
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
$15.99
|
Dry-Seal Shaft Seal, 1-3/8", Stern tube: 2-1/4" from LASDROP SHAFT SEALS
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
$157.99
|
Dry-Seal Shaft Seal, 1-3/8", Stern tube: 2-1/2" from LASDROP SHAFT SEALS
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
$157.99
|
Zinc, 1 3/8"shaft x 2 1/2"dia. x 2 7/8"L from CANADA METALS
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
$15.99
|
Fuel Line Assembly - 8' x 3/8" - Johnson/Evinrude from SIERRA
Silverado 3000 Premium fuel line assembly includes: 3/8" Fuel line. 2 Fuel connectors (18-8092). 1 Primer bulb (18-8005). Fits: All V8, 1984 & later V6, 1985 & later 120 HP, 140 HP outboards, 2 HP (1 cyl. ) - 75 HP (3 cyl.
$36.99
|
Fuel Hose, Type B-2 3/8" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
$2.19
|
Terminal Fuse Block, 3/8" Mounting Hole, 2 Terminal Studs from BLUE SEA SYSTEMS
New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse—Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraints Weatherproof—suitable for small open-cockpit boats and other harsh environments Insulating cap prevents accidental shorts Use 5/16" or 3/8" ring terminal.
$34.99
|
|
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
$3.69
|
304 Stainless-Steel Hose Clamp, 1-3/8" to 2", SAE Size 24 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.59
|
