Milled Fibers Filler

Mas Milled Fibers Filler, 1 Quart from MAS EPOXY
Milled Fibers (1/32" milled fiberglass) For use when epoxy must fill a void and provide extremely high strength and resistance to cracking (i. e.
$24.99

Closed-Base Cleats - Chromed Zinc 4 1/2", Plastic Base from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$24.99

Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
$13.99

Open-Based Cleats - Chromed Zinc, Plastic Base 4 1/2" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$22.99

Mas Slow Hardener, 1/2 Gallon from MAS EPOXY
When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled and extended application periods. Special features exhibited by this product include blush free surfaces, good ultraviolet stability, smooth finishes in cured films, excellent osmotic resistance, and the ability to cure under high humidity. The low viscosity of MAS Slow Hardener (200-250 poise) when mixed with MAS resin is ideal for fast wet-out of reinforcing fabrics.
$72.99

1" Outlet 1, 1" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

3/4" Outlet 1, 1-1/8" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99

5/8" Outlet 1, 3/4" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$23.99

Open-Based Cleats - Chromed Zinc, Plastic Base 6" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$19.99

Mas Slow Hardener, 1 Gallon from MAS EPOXY
When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled and extended application periods. Special features exhibited by this product include blush free surfaces, good ultraviolet stability, smooth finishes in cured films, excellent osmotic resistance, and the ability to cure under high humidity. The low viscosity of MAS Slow Hardener (200-250 poise) when mixed with MAS resin is ideal for fast wet-out of reinforcing fabrics.
$134.99

Mas Fast Hardener, 1/2 Gallon from MAS EPOXY
The low viscosity of Fast Hardener allows for quick wet-out of the heavy reinforcing fabrics often used in repair applications. Additionally, the superior bonding strength of Fast formulas is ideal for high strength secondary bonding applications such as structural tabbing and repair of laminations. The rapid cure time of Fast allows overnight curing in low temperature conditions. of formula unless rapid application techniques are incorporated. Always maintain a 2:1 ratio of resin : hardener.
$77.99