TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
$284.99
|
Holding Tank Display from FIREBOY XINTEX, INC.
New design electronics provide high reliability and long life with zero current draw except for the short periods required for level checking. Senders are simple, solidly constructed units with no moving parts, thus no floats to stick. Hookup consists of simply connecting 12 VDC power and the two-wire senders. Water/Holding tank display, round 2" gauge, for use with one (1) fresh water and one (1) holding tanks. Or will monitor two (2) fresh water tanks.
$99.99
|
TankWatch® 4 Panel & Cap with Vent, 22-inch Probes from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
$190.00
|
Freshwater Tank Display from FIREBOY XINTEX, INC.
New design electronics provide high reliability and long life with zero current draw except for the short periods required for level checking. Senders are simple, solidly constructed units with no moving parts, thus no floats to stick. Hookup consists of simply connecting 12 VDC power and the two-wire senders. Water/Holding tank display, round 2" gauge, for use with one (1) fresh water and one (1) holding tanks. Or will monitor two (2) fresh water tanks.
$99.99
|
1-1/2" NPT Threaded Pneumatic Tank Sender from FIREBOY XINTEX, INC.
PTS Senders (threaded): 1-1/2" NPT threaded pneumatic tank sender, 12" for freshwater and holding tanks PFS Senders (flanged, standard 5 bolt pattern): 5-Hole flanged pneumatic tank sender, 12" for freshwater and holding tanks Pneumatic LLM-2 Owners Manual and Installation Instructions.
$99.99
|
5-Hole Flanged Pneumatic Tank Sender from FIREBOY XINTEX, INC.
PTS Senders (threaded): 1-1/2" NPT threaded pneumatic tank sender, 12" for freshwater and holding tanks PFS Senders (flanged, standard 5 bolt pattern): 5-Hole flanged pneumatic tank sender, 12" for freshwater and holding tanks Pneumatic LLM-2 Owners Manual and Installation Instructions.
$99.99
|
Combination Holding/Water Monitor from FIREBOY XINTEX, INC.
Designed without mechanical sending units which can clog or stick, this system relies instead on a solid-state monitor that measures changes in pressure at the bottom of the tank to give you the most accurate readings possible. No electronics come in contact with water or waste. Three monitors are offered—one for water, one for waste and a combined monitor for water and waste. However, they may be shortened and recalibrated to match the specific needs of your tanks. Systems operate on 12V DC.
$99.99
|
Water Tank Monitor from FIREBOY XINTEX, INC.
Designed without mechanical sending units which can clog or stick, this system relies instead on a solid-state monitor that measures changes in pressure at the bottom of the tank to give you the most accurate readings possible. No electronics come in contact with water or waste. Three monitors are offered—one for water, one for waste and a combined monitor for water and waste. However, they may be shortened and recalibrated to match the specific needs of your tanks. Systems operate on 12V DC.
$84.99
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
$59.99
|
Holding Tank Fitting Kit from TODD ENTERPRISES
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
$21.99
|
Head & Holding Tank Neutralizer & Flush, Pint from WEST MARINE
Use this preparation to neutralize, flush, and prepare your head and holding tank for use with new treatments. Eliminates cross contamination which can render a holding tank treatment useless when switching from one type to another. Also ideal for spring commissioning or as preparation for winter layup.
$11.99
|
