Holding Tank Display from FIREBOY XINTEX, INC.
New design electronics provide high reliability and long life with zero current draw except for the short periods required for level checking. Senders are simple, solidly constructed units with no moving parts, thus no floats to stick. Hookup consists of simply connecting 12 VDC power and the two-wire senders. Water/Holding tank display, round 2" gauge, for use with one (1) fresh water and one (1) holding tanks. Or will monitor two (2) fresh water tanks.
$99.99
|
Freshwater Tank Display from FIREBOY XINTEX, INC.
New design electronics provide high reliability and long life with zero current draw except for the short periods required for level checking. Senders are simple, solidly constructed units with no moving parts, thus no floats to stick. Hookup consists of simply connecting 12 VDC power and the two-wire senders. Water/Holding tank display, round 2" gauge, for use with one (1) fresh water and one (1) holding tanks. Or will monitor two (2) fresh water tanks.
$99.99
|
Holding Tank Monitor from FIREBOY XINTEX, INC.
Designed without mechanical sending units which can clog or stick, this system relies instead on a solid-state monitor that measures changes in pressure at the bottom of the tank to give you the most accurate readings possible. No electronics come in contact with water or waste. Three monitors are offered—one for water, one for waste and a combined monitor for water and waste. However, they may be shortened and recalibrated to match the specific needs of your tanks. Systems operate on 12V DC.
$84.99
|
Combination Holding/Water Monitor from FIREBOY XINTEX, INC.
Designed without mechanical sending units which can clog or stick, this system relies instead on a solid-state monitor that measures changes in pressure at the bottom of the tank to give you the most accurate readings possible. No electronics come in contact with water or waste. Three monitors are offered—one for water, one for waste and a combined monitor for water and waste. However, they may be shortened and recalibrated to match the specific needs of your tanks. Systems operate on 12V DC.
$99.99
|
1-1/2" NPT Threaded Pneumatic Tank Sender from FIREBOY XINTEX, INC.
PTS Senders (threaded): 1-1/2" NPT threaded pneumatic tank sender, 12" for freshwater and holding tanks PFS Senders (flanged, standard 5 bolt pattern): 5-Hole flanged pneumatic tank sender, 12" for freshwater and holding tanks Pneumatic LLM-2 Owners Manual and Installation Instructions.
$99.99
|
5-Hole Flanged Pneumatic Tank Sender from FIREBOY XINTEX, INC.
PTS Senders (threaded): 1-1/2" NPT threaded pneumatic tank sender, 12" for freshwater and holding tanks PFS Senders (flanged, standard 5 bolt pattern): 5-Hole flanged pneumatic tank sender, 12" for freshwater and holding tanks Pneumatic LLM-2 Owners Manual and Installation Instructions.
$99.99
|
|
Water Tank Straight Pipe-to-Hose Adapter Kit from TODD ENTERPRISES
Include all the fittings necessary to attach a water tank to the appropriate hoses (two 1/2" hose barbs and one 1 1/2" hose barb). All fittings screw into the tank; the opposite end of the fitting accepts the hose.
$15.99
|
|
Water Tank 90°Pipe-to-Hose Adapter Kit from TODD ENTERPRISES
Kits include all fittings needed to attach hoses to a water tank. All fittings screw into the tank. The opposite end of the fitting accepts the hose. Teflon tape is supplied for easy installation and to ensure a tight fit. Two 1/2" hose barbs. One 1-1/2" hose barb.
$17.99
|
M-2A Fuel Vapor Monitor from FIREBOY XINTEX, INC.
A state-of-the-art fuel-vapor monitor with two-channel monitoring capability for the addition of a second sensor. The unit consists of a monitor display module and MS-2 gasoline and propane sensor. Types of Vapor Monitored: Gasoline and propane . Alarms: 85dB audible horn . Minimum Vapor Level for Activation: 18–20% LEL@70F . Monitoring Algorithm: Instantaneous readings . Display Size: 5" x 4" . Sensors Required/Included: Built-in; optional MS-2 second channel .
$244.99
|
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
$289.99
|
24" Flanged Sensor from FIREBOY XINTEX, INC.
Designed without mechanical sending units which can clog or stick, this system relies instead on a solid-state monitor that measures changes in pressure at the bottom of the tank to give you the most accurate readings possible. No electronics come in contact with water or waste. Three monitors are offered—one for water, one for waste and a combined monitor for water and waste. However, they may be shortened and recalibrated to match the specific needs of your tanks. Systems operate on 12V DC.
$109.99
|
