Single Line Guide

Double Line Guide from COLLIGO MARINE
Billet aluminum, hard-coat anodized with Teflon impregnation.
$69.99

Quadruple Line Guide from COLLIGO MARINE
Billet aluminum, hard-coat anodized with Teflon impregnation.
$59.99

Single Line Mainsail Reef Kit from HARKEN
Makes it simple to reduce sail. Harken has simplified the single line mainsail reefing kit developed from Garry Hoyt’s patented concept making this kit lighter and easier to install. A must for single handers or shorthanded sailing. Reefing with the kit is simple: ease the halyard to a predetermined mark, tension the reefing line, and re-trim the sail. For boats to 27'. Everything you need for installation is included except the line, a cleat and stopper. Ideal for boats from 22' to 27' (6.
$251.60

Line Guide (2 Piece, 2 Line) from COLLIGO MARINE
Billet aluminum, hard-coat anodized with Teflon impregnation.
$79.99

Line Guide (2 Piece, 4 Line) from COLLIGO MARINE
Billet aluminum, hard-coat anodized with Teflon impregnation.
$99.99

Line Terminator End Fitting, Black from COLLIGO MARINE
Great for small sport boats, beach cats, and synthetic lifelines. Extend the life of your synthetic lifelines by making the lashing sacrificial, not the expensive lifeline. For 3–6 mm line. Uses lashing line to 6. 4 mm (1/4 inch) diameter. 5000lb.
$24.99

Line Terminator End Fitting, Blue from COLLIGO MARINE
Great for small sport boats, beach cats, and synthetic lifelines. Extend the life of your synthetic lifelines by making the lashing sacrificial, not the expensive lifeline. For 3–6 mm line. Uses lashing line to 6. 4 mm (1/4 inch) diameter. 5000lb.
$24.99

Aluminum Line Terminator End Fitting, 11–13mm, Black from COLLIGO MARINE
Line Terminator™ end fittings are the only spliceable, lashable, and pinable end fittings available that meet Hampidjan's recommended 5/1 bending ratio for Dynex Dux. This is essential for long-term durabilty of Heat-Stretched, Dynex Dux, UHMWPE line, as the work hardening makes the line much stiffer and tight bending radii cause compressive stresses that weaken the line considerably.
$99.99

Aluminum Line Terminator End Fitting, 7–9mm, Black from COLLIGO MARINE
Line Terminator™ end fittings are the only spliceable, lashable, and pinable end fittings available that meet Hampidjan's recommended 5/1 bending ratio for Dynex Dux. This is essential for long-term durabilty of Heat-Stretched, Dynex Dux, UHMWPE line, as the work hardening makes the line much stiffer and tight bending radii cause compressive stresses that weaken the line considerably.
$89.99

Furler-RC100, 26-30' Boat Length, 1/4" Headstay dia., 42' Maximum Headstay Length, 3/8" Pin dia. from CHARLESTON SPAR
Continuous line furling system: from ocean race to cruising Perfect for racers looking to maximize sailing efficiency, these furlers feature a continuous furling line drum that has a number of advantages over conventional drum systems. The drum’s extreme low-profile increases luff length and puts the foot of the sail closer to the deck. Single line design eliminates drum overrides . Low profile design offers the longest possible jib luff . Large diameter drum for increased turning power .
$560.85 $3,161.15

Furler-RC300, Over 43' Boat Length, 1/2" Headstay dia., 60' Maximum Headstay Length, 3/4" Pin dia. from FACNOR
The drum’s extreme low-profile increases luff length and puts the foot of the sail closer to the deck. The simple pulley design virtually eliminates troublesome line overrides encountered with standard drum-style systems. The aerodynamic head foil with dual luff grooves makes sail changes fast and the simple tack ring fitting makes it easy to lift the drum for turnbuckle inspection or adjustment. Single line design eliminates drum overrides . Large diameter drum for increased turning power .
$509.52 $5,055.20