6" ID Single Hump Hose from SHIELDS RUBBER
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
$234.99
|
4" ID Single Hump Hose from SHIELDS RUBBER
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
$142.99
|
8" ID Single Hump Hose from SHIELDS RUBBER
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
$334.99
|
5In Rubbr Single Hump W/Clamps from SHIELDS RUBBER
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
$67.99
|
4In Rubbr Single Hump W/Clamps from SHIELDS RUBBER
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
$62.99
|
6In Rubbr Single Hump W/Clamps from SHIELDS RUBBER
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
$72.99
|
3In Rubbr Single Hump W/Clamps from SHIELDS RUBBER
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
$62.99
|
T-Bolt Exhaust Clamp - Dia. Range: 2.68"-3.34"; Hose ID 2 1/2" from SHIELDS RUBBER
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
$11.99
|
T-Bolt Exhaust Clamp - Dia. Range: 3.59"-4.25"; Hose ID 3 1/2" from SHIELDS RUBBER
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
$11.99
|
T-Bolt Exhaust Clamp - Dia. Range: 1.64"-2.02"; Hose ID 1 1/2" (5/8"W Band) from SHIELDS RUBBER
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
$11.99
|
T-Bolt Exhaust Clamp - Dia. Range: 5.30"-5.96"; Hose ID 5" from SHIELDS RUBBER
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
$13.99
|
