Replacement Stainless Steel Bug Screens for Bronze or Stainless Ports

Replacement Stainless Steel Bug Screens for Bronze or Stainless Ports from SEAFIT
Replacement bug screens for your polished bronze or stainless steel ports.
$24.99

Stainless-Steel Strainer Screen from GROCO
Stainless-Steel Strainer Screen.
$9.99

Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
$2.99

6" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
$67.99

Stainless Steel Toggle Bolt Anchors, 1/4"-20 (Package of Two) from GARELICK
Positively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 stainless steel. Saves time and labor. Provides added strength . Add reinforced safety and comfort to pedestal installations . Works with all Garelick seat pedestal bases . For deck or cabin thickness from 3/8" to 3-5/8" (1 - 9cm), requires 1/2" (13mm) holes .
$13.99

Stainless-Steel “S” Hook, 1/8" Wire Dia., 3/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
$2.99

Suncor Stainless Steel Anchor Shackle, 5/8", WLL 4000 lb. from SUNCOR
Anchor Shackle, 316NM made of stainless steel with oversized screw pin.
$23.99

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
$57.99

Stainless Steel Toggle Bolt Anchors, 1/4"-20 (Package of Six) from GARELICK
Positively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 stainless steel. Saves time and labor. Provides added strength . Add reinforced safety and comfort to pedestal installations . Works with all Garelick seat pedestal bases . For deck or cabin thickness from 3/8" to 3-5/8" (1 - 9cm), requires 1/2" (13mm) holes .
$35.99

Stainless Steel Deck Fills from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
$39.99

304 Stainless-Steel Hose Clamp, 5-7/8" to 6-11/16", SAE Size 99 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$2.19