24V Macerator Pump, 8A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
$199.99
|
12V Macertor Pump, 16A Draw from JABSCO
Now featuring a sealed design, these pumps include run dry protection with a self-priming flexible impeller and stainless-steel wear plate. Self-priming to 5' when wet and grinds waste to 1/8" or smaller. Pumps 12gpm. The inlet port has a 1 1/2" hose barb combined with 1 1/2" male thread to screw directly onto a tank flange. Use 1"–1 1/2" hose adapter (Model 3274123) for 1 1/2" sanitation hose. Material: Nylon body, nitrile impeller, stainless steel wear plate .
$159.99 $159.99
|
Oil Change Pump - 12 Volt from JABSCO
The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge. Pump Body: Bronze. Impeller: Nitrile. Shaft Seal: Buna Lip Type.
$260.00
|
Float Switch from SHURFLO
Offered with or without a protective cage, this non-mercury float switch utilizes mechanical contacts for reliable bilge pump activation. Includes 3', tinned wire leads. May be mounted apart from pump or snapped into base plate of Shurflo 380, 500, 700 and 1000gph pumps. 4. 4"L x 3. 6"W x 1. 3"H. For use with 12V and 24V DC pumps. ABS plastic. Two year limited warranty. Activation Method: Float with mechanical contacts .
$32.99
|
500gph 24V Bilge Pump, 3/4" Port, 1.0A Draw, 1.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
$29.99
|
Water Circulating Pump - #5850-0001 from JABSCO
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
$459.99
|
Water Circulation Pump - #43210-0001 from JABSCO
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
$529.00
|
Water Circulation Pumps - #18940-0010 from JABSCO
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
$399.99
|
Water Circulating Pump - #18830-1020 from JABSCO
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
$314.99
|
3700gph 24V Bilge Pump, 1-1/2" Port, 5.0A Draw, 15A Fuse, 7-1/4"H x 4-7/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
$182.99
|
Water Circulating Pump - #42730-000 from JABSCO
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
$559.00
|
